Results 1 to 12 of 12
  1. #1
    Active Member
    Join Date
    May 2011
    Location
    jupiter
    Posts
    49
    Spyder Garage
    0

    Default Tic Tic Tic Gone!

    Left front was driving me nuts between brake squeals and tic noise at low speed.I pulled wheels and calipers took my brake CRC brake quiet put it all over the backing plate on the pads reinstalled .Now my squeals and tic tic tic are gone.

  2. #2
    Registered Users Motavar's Avatar
    Join Date
    Nov 2010
    Location
    Lower Saucon, PA
    Posts
    226
    Spyder Garage
    0

    Default

    This may be a fun weekend project. How hard is it to get the fender off the front? I haven't looked yet but I was debating doing that with the brake quiet stuff.

  3. #3
    Invalid Emails
    Join Date
    Jun 2008
    Location
    Augusta, GA
    Posts
    506
    Spyder Garage
    0

    Default

    +1
    Did the disc brake quiet about 3K ago and I forget what the squeal sounded like! (just jinxed myself)

  4. #4
    Spyderless Member
    Join Date
    Dec 2008
    Location
    north/central n.j.
    Posts
    6,432
    Spyder Garage
    0

    Default

    Quote Originally Posted by GA-SPYDER View Post
    +1
    Did the disc brake quiet about 3K ago and I forget what the squeal sounded like! (just jinxed myself)
    I've had good results using the CRC, But riding though the slush and wet snow last winter i would have to apply it quite often, So i finally gave in and got the 3 gen pads,
    No More squeal and no more CRC.

  5. #5
    SpyderLovers Sponsor capt.jim's Avatar
    Join Date
    Mar 2008
    Location
    homestead, FL>
    Posts
    597
    Spyder Garage
    0

    Default

    I had the old pads and the CRC, all was quiet. Installed the Gen 3 pads with no CRC and have a little squeal sometimes at slow speeds, reverse sounds ugly.

  6. #6
    Registered Users LennyO's Avatar
    Join Date
    Jun 2011
    Location
    Jacksonville, FL
    Posts
    102
    Spyder Garage
    0

    Default

    What's CRC ????
    Ride safe and often!

    [IMG]//C:/Users/Lenny/Downloads/VisitedStatesMap.jpg[/IMG]

  7. #7
    Registered Users Motavar's Avatar
    Join Date
    Nov 2010
    Location
    Lower Saucon, PA
    Posts
    226
    Spyder Garage
    0

  8. #8
    Very Active Member Y Rider's Avatar
    Join Date
    Oct 2010
    Location
    Springfield, MO
    Posts
    921
    Spyder Garage
    1

    Default

    I have a 2011 RT LTD and get the occasional brake squeal only when backing up. Seems to be just the back wheel. Can the brake quieting spray be applied without removing anything and how often does it need to be applied?
    MODS: Elka Shocks, ESI RT HMT Brake Light, ESI RT Brightsides, ESI Fender TIPS, ESI RIPS, ESI RT Day Runners, Grip Puppies
    AmerSeal Sealant, KewlMetal Kewlock, Scorpio I900 Security System, Stebel Nautilus air horn, KewlMetal Highway Brackets & ISO Wings
    Corbin seat, trunkrest & driver backrest, Capt.Jim's Belt Tensioner, SpyderPops LaBlock, Cat Shields, Bumpskid & Belt Guard
    Seal PUP Floorboards, BRP chrome, Ron's Anti-Sway Bar, Lamonster LED Head/Fog Lights & BRP Air Scoops
    2011 RTL , White

  9. #9
    Registered Users LennyO's Avatar
    Join Date
    Jun 2011
    Location
    Jacksonville, FL
    Posts
    102
    Spyder Garage
    0

    Default

    Thanks! Learning every day....
    Ride safe and often!

    [IMG]//C:/Users/Lenny/Downloads/VisitedStatesMap.jpg[/IMG]

  10. #10
    Active Member
    Join Date
    May 2011
    Location
    jupiter
    Posts
    49
    Spyder Garage
    0

    Default Brake squeel

    The CRC I use was in a squeeze bottle and was a orange color and applied to metal on the back of pad and it does not wash off.let it dry or get tacky after 15 minutes and reassemble. I did not have to remove fender.

  11. #11
    Registered Users
    Join Date
    Jul 2011
    Location
    Nj
    Posts
    10
    Spyder Garage
    0

    Default No Tic Tic Tic!!!

    Che57vy, did this CRC really get rid of the ticking from the front left wheel?! I have the same problem and it drives me crazy!!! Could you please give me a little detail in what exactly you did? I NEED to do this!! Thanks in advance.

  12. #12
    Very Active Member coz's Avatar
    Join Date
    May 2011
    Location
    cincinnati, ohio
    Posts
    2,378
    Spyder Garage
    0

    Default BRAKE PAD HOW TO WITH PICS

    could someone please do a how to with pics on rs gs brake pads? it would be very helpful to those of us who haven't messed with spyder brakes before. especially applying the crc goo. ,,,,,,,,,,,,,,thanks,,,,,,,,,,,,coz
    it was fun while it lasted.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •