woods racing exhaust

[SethO]

http://rotax.net/index.php?main_page...products_id=96

anyone on here ever use this exhaust, its says 7hp to the tire and if that is the case I am getting it tomorrow

[stutzmason]

any idea what it sounds like?

[SethO]

to hell with it, it was ordered, should be here next week, hopefully by drag racing wednesday night.

[Fly boy]

Atta Boy!


This is what I'm going to be messing with
http://www.autozone.com/autozone/acc...questid=823201

[AMTJIM]

I like the looks of that Wood exhaust, I think that may the only shorty for the Spyder thats out there.

[AMTJIM]

Fly boy, lots of choices here to browse.
http://www.mufflermall.com/

[SethO]

Talked to elloit today, great ppl there, i am testing( again pushing the specs to see how it will hold up) another new exhaust with the added spark arrestor and baffle to get 5 decimal reduction should be here tuesday

[Questions]

It looks cool anyway!! Let us no how it turns out, I want to get rid of my two brothers setup, I was looking at the yosh pipe

[SethO]

It looks cool anyway!! Let us no how it turns out, I want to get rid of my two brothers setup, I was looking at the yosh pipe

my yosh pipe did not make 2k for miles and blew up, I know ron has one that is holding up but his is carbon fiber and mine was aluminum.


Its in the mail today and I should see it tuesday. I will get some video of the sound with the baffle in and out.

[Questions]

Good to know seeing as how they are one if the more expensive pipes

[Fly boy]

Fly boy, lots of choices here to browse.
http://www.mufflermall.com/

Thanks!

I am just going to the local stores so I can see them before I buy them. I want to make sure I get a size that will look comparative to the stock muffler.

[AMTJIM]

I think that thing is going to have rivet problems early on, especially those 2 on the heat shield. Not sure what the internals looks like, but stainless harware may be easy to install on the entire exhaust if those rivets go bad. I really like that exhaust, I wouldn't mind upgrading or repairing the hardware.

[SethO]

I think that thing is going to have rivet problems early on, especially those 2 on the heat shield. Not sure what the internals looks like, but stainless harware may be easy to install on the entire exhaust if those rivets go bad. I really like that exhaust, I wouldn't mind upgrading or repairing the hardware.

the only rivets are on the heat shield, its welded all around. I bought a 750+ leo vince and it went to **** and I had to rebuild it, if this holds up I will be selling that with my 1st gen juicebox, both would be great for your average user looking for more power and gas mileage plus a little better sound.

[AMTJIM]

I see 2 rivets on each heat shield and looks like 3 on the end cap? Are they all mechanical baffle or do they have glass packing?

[SethO]

I see 2 rivets on each heat shield and looks like 3 on the end cap? Are they all mechanical baffle or do they have glass packing?

the only thing that was screwed or riveted was the noise reducer and spark arrestor, they said if I can blow it up, they would send me another one. Don't get me wrong I have been burned on the same line twice but you have to figure woods racing has been in the business of racing rotax motors for a little while.

[jedd]

Can it be re-packed???

[SethO]

Can it be re-packed???

I think you have to cut the welds to repack it, which for me isn't a issue at all but I will have to see when I get it how its setup

llets race.

[jedd]

I think you have to cut the welds to repack it, which for me isn't a issue at all but I will have to see when I get it how its setup

llets race.

Na I retired a winner

[AMTJIM]

I blew the pics up 200%, the harware looks like it may be button head hex screws?...very cool! That's gonna be a great little pipe, I really like the look of it. So small and simple, mechanical baffle...no repack. One of the days I am going to turn my little exhaust tip creation into a shop ornament and grab one of these Wood.

[SethO]

Na I retired a winner

no one retires from the huligans, bleed in and bleed out

Testing, always testing.

I blew the pics up 200%, the harware looks like it may be button head hex screws?...very cool! That's gonna be a great little pipe, I really like the look of it. So small and simple, mechanical baffle...no repack. One of the days I am going to turn my little exhaust tip creation into a shop ornament and grab one of these Wood.

it should be awesome, they said without the baffle it was 105 decimals but with the baffle it was 100 so I will have to see if I get more calls. I do like the fact that it is one piece.

[stutzmason]

Any news onthe new pipe? Sound? Install? Anxiously awaiting here.

[RoadHammer]

Seth, news on the pipe??

[SethO]

did not get it before I went drag racing just got back a few hours ago, got to put it on today. Should have a full review of it tomorrow before work

[SethO]

its a little louder than I thought it was going to be with the baffle in.

let her buck. Testing, always testing.

[stutzmason]

Sounds awesome ... any chance of a sound test with the baffle out?