Results 1 to 17 of 17

Hybrid View

  1. #1
    Registered Users
    Join Date
    Mar 2011
    Location
    Fl
    Posts
    12
    Spyder Garage
    0

    Default What size of of trailer do we need to haul a rs Cam Am Spyder?

    Hi to all,

    We are going to TN to pick op a new Can AM roaster. What size trailer to we need to haul it back to Fl? I have a 5ft by 10 ft trailer.

    Thanks,

    Ken Fisher Winter Garden, Fl.

  2. #2
    Very Active Member freebob's Avatar
    Join Date
    Apr 2009
    Location
    Bluffton, S.Carolina,USA 29909
    Posts
    568
    Spyder Garage
    0

    Default

    Quote Originally Posted by corvettencrs View Post
    Hi to all,

    We are going to TN to pick op a new Can AM roaster. What size trailer to we need to haul it back to Fl? I have a 5ft by 10 ft trailer.

    Thanks,

    Ken Fisher Winter Garden, Fl.

    At least a 6X

  3. #3
    Registered Users Dragonrider's Avatar
    Join Date
    Feb 2009
    Location
    Canby, OR
    Posts
    3,073
    Spyder Garage
    0

    Default

    Nothing smaller than a 6x10 for an RS - bigger for a RT
    2014 RT SE6 Rider
    X - Honda Rider
    X - RT S driver
    X - RS driver
    Lifetime VFW Member

  4. #4
    Registered Users dryheat's Avatar
    Join Date
    Feb 2008
    Location
    Oro Valley, AZ
    Posts
    206
    Spyder Garage
    0

    Default

    Quote Originally Posted by freebob View Post
    At least a 6X
    Agreed. the Spyder is 60" across the front. You'd be scraping the sides (assuming your trailer has sides).
    pe 792; Hindle, performance filter, O2 mod, custom seat, NMN risers, F1 Slider, cowl vents, cold air induction, Triple play, Tipz kit, highway pegs, Kury ISO pegs, grips and throttle lock, 3 gal aux Tour Tank on custom rack.

  5. #5
    Very Active Member
    Join Date
    Oct 2007
    Posts
    4,672
    Spyder Garage
    0

    Default

    i scraped the front rims up on my rs when i put it on a 5x8 trailer. you need one at least 6x10.

  6. #6
    Very Active Member IWN2RYD's Avatar
    Join Date
    Apr 2010
    Location
    Puget Sound, WA.
    Posts
    1,696
    Spyder Garage
    0

    Wink

    Just some advice... Try and find a trailer with a 15" rim as these are normally 3500# capacity and use automotive tires. They also do not have the 55mph speed limiter issue.

    Also, please measure the inside dimensions on the trailer you look at. One companies 6x10 in not what another is. I learned this the hardway. One trailer I bought was advertized as a 6x10. Only to find out that was the external dimensions and the internal was closer to 5'6"x9'6"

    We are using what I think is a wonderful single axle trailer (Best I have ever owned) by Snake River. All Aluminum and it tracks so nicely I forget it is there some times... Had to build some ramps for the Spyder to get in and out, but that is just fine as they have a dual function as a tire chalk when in transit...

    A tad on the spendy side, but after a lot of research we chose this over the other 12 we looked at at the time. When not towing our Spyder we use it to hall firewood, gravel, beauty bark, etc...

    BlUe SpYder RT-S SE5 #303I don't suffer from insanity; I enjoy every minute of it ... Proud Member of A.S.S. (Average Senile Spyderryder)

    Our 2010 RT-S Mods... *Warning* If you can read this, it is already too late and there is no known cure. You have Spydervirus.

  7. #7
    Motorbike Professor NancysToy's Avatar
    Join Date
    Mar 2008
    Location
    Allegan, MI
    Posts
    20,514
    Spyder Garage
    0

    Default

    clear width is the key. You will need at least five and a half feet for an RT (a couple less for an RS) and that will give you precious little extra space on each side. Take your tape measure! The ramp length is also important...the longer the better. The Spyder is low and bottoms out easily at the ramp/bed junction. Raising the trailer tongue with the tongue jack, or loading from a hill or platform can help. You should also read the Owners Guide for the correct way to tie down the Spyder. On a short trailer, wheel chocks may be helpful.
    -Scotty
    2011 Spyder RTS-SM5 (mine)
    2000 BMW R1100RTP, motorized tricycle & 23 vintage bikes
    2011 RT-622 trailer, Aspen Sentry popup camper, custom motorcycle trailer to pull behind the Spyder



    Mutant Trikes Forever!

  8. #8
    Invalid Emails
    Join Date
    Jul 2010
    Location
    1/2way tween STJames and Salem Mo
    Posts
    1,228
    Spyder Garage
    0

    Talking

    Quote Originally Posted by corvettencrs View Post
    Hi to all,

    We are going to TN to pick op a new Can AM roaster. What size trailer to we need to haul it back to Fl? I have a 5ft by 10 ft trailer.

    Thanks,

    Ken Fisher Winter Garden, Fl.
    If you have the stats on the RS check width of front and length of course but think the bike should fit on your trailer. Be more FUN if you drove it back tho. If you are getting the
    RT That is a little wider I think. Either way more fun ryding it!!! it's what ya get em for. and

  9. #9
    Member
    Join Date
    Apr 2019
    Location
    Tucson, Az
    Posts
    2
    Spyder Garage
    0

    Default

    You guys are great I was just looking to buy a trailer for my Spyder and I ran accross this post. You saved me a lot of money!

  10. #10
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,144
    Spyder Garage
    2

    Default

    Quote Originally Posted by Joe18RT View Post
    You guys are great I was just looking to buy a trailer for my Spyder and I ran accross this post. You saved me a lot of money!
    It’s great you got something out of this thread, Joe ....but I don’t know if any of the contributors will read your thanks, as the last post was over 8 years ago

    Pete
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  11. #11
    Very Active Member Vader's Avatar
    Join Date
    Jul 2014
    Location
    Hudson Valley
    Posts
    681
    Spyder Garage
    0

    Default

    Quote Originally Posted by Joe18RT View Post
    You guys are great I was just looking to buy a trailer for my Spyder and I ran accross this post. You saved me a lot of money!
    Here's what I did...
    https://www.spyderlovers.com/forums/...-uhaul-trailer
    IT IS, WHAT IT IS...


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •