Quote Originally Posted by Peter Aawen View Post
Check out this thread Allen

https://www.spyderlovers.com/forums/...ighlight=riser

Yeah, it's for a 2018, but the RT Handlebars remained the same from 2010 right thru to the change that came with the Gen III version in 2020, so anything that works for 2010 handlebars is very likely to work for a 2019!

And yes, as you've found & Partzman suggests, if you're looking for 'different handlebars' or a 'replacement' set, there's just not anything available out there apart from the Tri-axis bars!

BUT, you aren't necessarily restricted to JUST replacing &/or using risers to lift the ENTIRE 2010-2019 RT Handlebars - check out the thread above! There's a relatively easy & cheap solution, IF you don't mind the look!
As I said in that LINKED post it can be done using the " dog bone risers " from Dennis Kirk ...... the way they work is, depending in which direction you ROTATE, it will elevate or lower the grips and make them closer or farther away ..... good luck ...Mike