Apple Car Play download was released, but failed! Still waiting....

[OlJim]

The download for ACP is now available. Just finished the download on my 2024 RT Limited. Have fun gugs

[jfischer]

Pics or it didn't happen

[jfischer]

Hallelujah! OlJim isn't pulling our legs with a late April 1st joke! Thanks for letting us know!

Took about 10 minutes to download, another 10 to install. Engine had to be running on mine to actually install it.

IMG_6363.jpg
IMG_6365.jpg

[Riplin]

BRP uploaded a couple of YouTube videos today on the 10.25 screen. Which included ACP. So I was curious and went and checked for downloads. Yup it is available. Im downloading right now.

IMG_9339.jpg IMG_9339.jpg

[Brentc]

This is a 2024 only addition, correct?

[jfischer]

This is a 2024 only addition, correct?

You are correct sir.

[Riplin]

This is a 2024 only addition, correct?

Correct

[OlJim]

My ACP has gone away, anyone else with this problem?

[depowelljr]

My ACP has gone away, anyone else with this problem?

Update was available this morning but kept receiving download failure error messages. Tried this afternoon however update is no longer available. Not sure what is going on. Tried on two different Spyders with the same results. Also received unable to reach update server error message.

Wayne

[Maplehawk]

beginning to regret buying this Spyder, should have gone with the Honda Goldwing DCT

[Woodaddict]

My ACP has gone away, anyone else with this problem?

WOW!!! how can a downloaded and installed update go away?????? ONLY BRP. Sad to say I feel for those new 2024 owners, should not be happening. I would NOT be happy camper either if I had new one

[CloverHillCrawler]

WOW!!! how can a downloaded and installed update go away?????? ONLY BRP. Sad to say I feel for those new 2024 owners, should not be happening. I would NOT be happy camper either if I had new one

Pretty easy for it to happen, a system admin probably set the wrong release date /time in SCCM or whatever software they are doing updates with for the update, someone caught it and pulled the update back to the previous version.

But after reading the next post this is starting to sound more like a borked update went through. Also a possibility of a server crash due to the server being overloaded. It's why I will stay with my base F3 and not upgrade.

You can be borked by cloud connectivity with having a direct wifi connection to your machine.

Look at what is happening now with garage door closers and chamberlain. I always joked with my wife when they came out with a garage door opener that you could control through an app on your phone (controlled through a central cloud server) that you would go out on the street one day and see everyones garage door opening and closing from a hacker having fun and just randomly open and closing doors repetitively. Well Chamberlain was letting people connect using unauthorized api's for smart home controls but now just realized how vulnerable they were to an attack by doing so. They have just recently cut off all access to all unauthorized api's and thus breaking a lot of peoples home automation systems leaving them screwed.

After over 20 years of doing IT I learned that if it really doesn't need to be connected to the internet it is just best to leave it off of it.

[jfischer]

Well Chamberlain was letting people connect using unauthorized api's for smart home controls but now just realized how vulnerable they were to an attack by doing so. Thay have just recently cut off all access to all unauthorized api's and thus breaking a lot of peoples home automations systems leaving them screwed.

I think Chamberlain cut off the APIs because they saw $$$ that they were leaving on the table by letting others integrate into their system and thought they could rake in that sweet, sweet cash for themselves. So they cut off their nose to spite their face. There are tons of PO'd Chamberlain/Liftmaster owners whose home automation is now broken because of this. There are workarounds, but they are not nearly as easy or clean as the previous Chamberlain API.

[KW1M]

Attended an event at our local dealer/sponsor

https://www.hkpowersports.com/

https://www.usspyderryders.com/nh-merrimack-valley-nh

Got to see Carplay in action.

Issue according to tech was a glitch that after installing, the next time you checked/connected wifi it would potentially delete carplay. They are expecting a quick fix.

Can also confirm the update cleared all faults on that 2024 bike...

Liked the look/feel and Siri will be a good addition "Directions to xxx" and it worked. We're soooo close now...

[WRCLVR]

I had my dealer do the ACP update as the bike was still there. It took them about one hour... but they had to clear all the BS codes the screen was showing, so that's understandable.

I would not recommend doing OTA updates, as coming from a Merecedes Benz background, those are famous for going very wrong, failing, and then saying there is no update available....

Do yourselves a favour and get the dealer to perform it; in fact, insist on it, and then check to make sure it WORKS while you're still there!

[gord]

Hey new to the 2024 Spyder RTL... I see a whole lot of waiting for an update. Does anyone have the latest news? When will this update be coming?

[Riplin]

My ACP symbol is still there. But I have no Bluetooth to my phone. Bluetooth to my helmet is connected.
After the download ACP worked fine. Maps, music all good. Now it won’t find my phone. Phone says it is connected. Bike says not connected.

[BlueSpy]

Yes, I downloaded the CarPlay V2.1.1 at 2pm today, seemed to work good for a while (had some issue with my USB cable), but otherwise not bad. Had the robotic low voice from Siri first time use, but after that had the female voice. Then I may have made a mistake, cause at 5pm I got a notice on screen for another update which was V2.1.0 and downloaded it, now it doesn’t show AppleCarPlay at all and when I go to see fault codes, it is showing the U0155 Unable to connect to cluster. Will go to dealer tomorrow and see if they can download it from BUDS2. And this is after I went to buy a APPLE USB cable, darn it. Oh well, I know the CABLE is good!! I should have probably not downloaded the V2.1.0 since it only said it was downloading BRP Connect. I’m not a computer savvy guy but to me it seems like there is now a “conflict” between the two versions. I could be wrong….

Do you still have the ACP symbol??? At this time, mine is gone…

[jfischer]

Yes, I downloaded the CarPlay V2.1.1 at 2pm today, seemed to work good for a while (had some issue with my USB cable), but otherwise not bad. Had the robotic low voice from Siri first time use, but after that had the female voice. Then I may have made a mistake, cause at 5pm I got a notice on screen for another update which was V2.1.0 and downloaded it, now it doesn’t show AppleCarPlay at all and when I go to see fault codes, it is showing the U0155 Unable to connect to cluster. Will go to dealer tomorrow and see if they can download it from BUDS2. And this is after I went to buy a APPLE USB cable, darn it. Oh well, I know the CABLE is good!! I should have probably not downloaded the V2.1.0 since it only said it was downloading BRP Connect. I’m not a computer savvy guy but to me it seems like there is now a “conflict” between the two versions. I could be wrong….

Good God. I think I will stay on 2.1.1 and not let it revert to the older version based on your experience. Unless I see some fatal flaw in 2.1.1 I will run with it until 2.1.2 or whatever the next drop will be. Did you get an alert that caused you to go look at the fault codes, or was it just there when you went and looked in there?

My guess is there's something wrong with 2.1.1, but not sure if rolling back is worse than just leaving mine on 2.1.1 until the "fix".

[Maplehawk]

Wasn't able to download ACP, bike reported no update available, software is up to date

After checking for Software Bike will now not even connect to WiFi

[KW1M]

Same problem here -- connected to wifi briefly, saw the update then failed (in Northeast so power/internet has been flaky with the storm.

Now won't connect wifi... ugh... Keep trying!

[jfischer]

Same problem here -- connected to wifi briefly, saw the update then failed (in Northeast so power/internet has been flaky with the storm.

Now won't connect wifi... ugh... Keep trying!

Probably just wasting your time right now. Multiple people have said here and on FB that they are not being presented with the update anymore. My guess is that they found a significant bug and now have to fix it and re-release it.

It never ends...

[Ex-Rocket]

Right now I'm extremely happy to have a 2017 F3 Limited now. Everything works, FM radio and Garmin GPS. Life is good.

[Riplin]

I tried the chat function on BRP website. I was informed that no release has been issued. But soon.
I called the service # and was informed no formal announcement has been made but it is available for some vin#
They had no answers for me about the Bluetooth issue was. A ticket was started for me.
I was asked for a vin#. When I turned my Spyder on to get the vin. My phone connected and everything worked including ACP.

[ARtraveler]

I am not happy, and I did not even buy one of the Spyders with ACP.

I would be fuming angry if I had.