Results 1 to 5 of 5

Threaded View

  1. #1
    Member
    Join Date
    Nov 2023
    Location
    Italy
    Posts
    2
    Spyder Garage
    0

    Default 2012 RS SE5 with error codes P0991 & C1282 - any ideas?

    Hi everyone, I'm Oscar Olmi and I'm writing from Italy, I would kindly need some advice:
    I own a Can Am Spyder RS 2010 bought in July 2023 with 10,000km, the bike presents me with 2 problems,
    1 - "Check Brake fault" and it was the brake oil pressure, bled the calipers and ABS, now it brakes very well, checked the sensors on the brake pump and they are ok (STOP sensor switch and SWITCH sensor/low pressure brake pedal), but error persists.
    2 - when cold the motorbike gives me the "check transmission" error, I state that the motorbike works correctly, when hot the transmission problem disappears, I had the dealer check it and they changed the SE5 hydraulic transmission crankcase and blipper sensor and for a while over time the transmission problem no longer occurred.... now with winter temperatures it returns.

    Checking errors stored with a manual procedure I found the following: P0991 C1282 on the motorcycle display.
    Does anyone have any ideas before you think about reselling the bike?? I would be very sorry because it's very funny.
    Thank you
    Olmi Oscar
    Last edited by Peter Aawen; 12-14-2023 at 08:13 PM. Reason: Modified title to briefly ask the question/s... + Rule 1 compliance... ;-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •