Anyone know where to get Phillps Head Style Rivets?

[Chasinsparks]

Does anyone know where I can get the Phillps Style Rivet/Push Pin? These are used in the 2021 Spyder RT in the saddle bag area. I think this is the correct part number but not certain 293150248.

[Mikey]

try your hardware store in the assorted nuts and bolts, and assorted buttons and nobs. Or your auto parts store! Or lamonster garage.

[Chasinsparks]

Thanks did not even think about a local parts store so used to ordering everything, reached out to Lamonster waiting to hear back.

[Wmoater]

Those are a barrel thread fasteners or rivnuts. McMasters Carr will have them. They should have about 100 different varieties of them. Once you find the exact name type of McMaster just do a search depending on how many you need.

Here’s a link to McMasters: https://www.mcmaster.com/products/nuts/rivet-nuts~/

[Chasinsparks]

Thank you much

[Bfromla]

Does anyone know where I can get the Phillps Style Rivet/Push Pin? These are used in the 2021 Spyder RT in the saddle bag area. I think this is the correct part number but not certain 293150248.

Ummm Your sure came off a spyder? Don’t see the globs of yellow thread lock-tight that are on EVERYTHING with threads.

Agree those are a barrel thread fasteners or rivnuts. Hopefully stainless steel at that.

[DriftersWay]

All I did was drill it out to 1/4 inch and installed a standard push pin

[Chasinsparks]

All I did was drill it out to 1/4 inch and installed a standard push pin

I was thinking that was my next step as I have some of those laying around.

[K80Shooter]

I removed the plastic screw piece and installed a metal screw into the other half, it works great.

[K80Shooter]

Ummm Your sure came off a spyder? Don’t see the globs of yellow thread lock-tight that are on EVERYTHING with threads.

Agree those are a barrel thread fasteners or rivnuts. Hopefully stainless steel at that.

Those are a barrel thread fasteners or rivnuts. McMasters Carr will have them. They should have about 100 different varieties of them. Once you find the exact name type of McMaster just do a search depending on how many you need.

Here’s a link to McMasters: https://www.mcmaster.com/products/nuts/rivet-nuts~/

These are not rivets, they are a type of plastic push pin used on the 2020 plus models.

[Chasinsparks]

These are not rivets, they are a type of plastic push pin used on the 2020 plus models.

That is what I thought, BRP has them listed as "293150248 Plastic Rivet" items 601 and 611 in the parts guide but they are nearly $3.00 each, I just replaced them with regular pushpins. The downside is due to the location if I need to get in there again I would have to drill them out.

[Super1330]

Does anyone know where I can get the Phillps Style Rivet/Push Pin? These are used in the 2021 Spyder RT in the saddle bag area. I think this is the correct part number but not certain 293150248.

I have ordered mine at Amzn. inexpensive, many sizes.

[K80Shooter]

That is what I thought, BRP has them listed as "293150248 Plastic Rivet" items 601 and 611 in the parts guide but they are nearly $3.00 each, I just replaced them with regular pushpins. The downside is due to the location if I need to get in there again I would have to drill them out.

Use a o-ring pick to lift them up and out. A set has several shapes in it and one of those should work. About 10 bucks at amazon.

[Peacekeeper6]

Have you tried Fastenal ??

[Motorcycledave]

does anyone know where i can get the phillps style rivet/push pin? These are used in the 2021 spyder rt in the saddle bag area. I think this is the correct part number but not certain 293150248.

granger