-
Very Active Member
-
Very Active Member
I don't know what the chalk method is?
You can't check the front tires on a ride unless you carry an air compressor. As soon as you put your gauge on you will lose about 1 or 2 PSI which is about 10% of the PSI
I use a TPMS on all my vehicles
-
Originally Posted by ahh-cool
I don't know what the chalk method is?
You can't check the front tires on a ride unless you carry an air compressor. As soon as you put your gauge on you will lose about 1 or 2 PSI which is about 10% of the PSI
I use a TPMS on all my vehicles
You are absolutely correct about the 1 or 2 loss in PSI. With the PSIs we run, 1 or 2 means much more than if we were running say 80/90 PSI. Also, ambient influences will affect us more. I also run TPMS (FOBOs) for that very reason. The chalk method is simply a yardstick method to get you into the ballpark so to speak. It's not for fine tuning your PSIs. Use a piece of chalk to make a mark across the tread of your tire. Then drive in a straight line for a short distance and examine the chalk mark. I mark next to the stem to make it easier to find. If the mark is gone in the center of the tire and remains on the two outside edges then you have too much PSI. If the mark is still showing on the center and gone on the outside edges then you need more PSI. More importantly, if the mark is gone on one side of the tire and not on the other side, then you have a serious alignment problem. I might also suggest you get a tire tread depth gauge. That can also help give you an insight as to how your tires are wearing. Good luck in understanding and playing with your PSIs but don't let it interfere with the enjoyment of riding your spyder.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|