This was under the 2021 RTL after moving. Looks like a rubber bumper of some kind but I can't see where it came from. I've looked on the BRP parts site but cannot find it. Any ideas?
When those are installed correctly they rarely if ever come out. Guessing it was just an extra one rolling around somewhere during the assembly process and it finally shook out.
When those are installed correctly they rarely if ever come out. Guessing it was just an extra one rolling around somewhere during the assembly process and it finally shook out.
Do you know where they go? If I find that out I will look on the parts list to get the part # and maybe I can find out whether it is just extra or there is someplace that doesn't have one.
Thanks
Life is sometimes unbelievable ..... I recently found the Exact same thing ...... hope you / we find out what it's to .... Mike
Found it on the BRP Parts site. Under the passenger foot peg. I think when lifting the passenger foot peg there is enough suction pressure from the foot peg that it pulls the rubber foot right out of it's hole.
It's the neutron drain plug for the Flux Capacitor. Sorry, someone had to go there.
2011 RTS (Sold to a very nice lady)
1998 Honda Valkyrie
2006 Mustang GT. Varooooom!
US Navy Veteran
SC Law Enforcement Boat Captain
CNC Machine Service Technician
President: Rolling Thunder SC1
Member: Disabled American Veterans, Rock Hill, SC
Member: American Legion
Experience is recognizing the same mistake every time you make it!
When the passenger footrest is lowered, the stops circled in red contact the rubber stoppers to prevent metal to metal contact that would eventually wear off the finish of the footrest stops.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
****************************** Cognac 2014 RT-S
Found it on the BRP Parts site. Under the passenger foot peg. I think when lifting the passenger foot peg there is enough suction pressure from the foot peg that it pulls the rubber foot right out of it's hole.
Wow, how did you even find that and tell from that pic that that is what it was? Lol
I have an ST and see things like this behind where corners of the panels are or meet to keep them tight.
Do you know where they go? If I find that out I will look on the parts list to get the part # and maybe I can find out whether it is just extra or there is someplace that doesn't have one.
Thanks
Yep. they are generally used to take up space between parts that don't fit tight or need a slight cushion. Trunk lids, body panels, and footrests.
Found it on the BRP Parts site. Under the passenger foot peg. I think when lifting the passenger foot peg there is enough suction pressure from the foot peg that it pulls the rubber foot right out of it's hole.
Thank you for posting this agrimm. You just saved me a whole bunch of time & aggravation trying to figure out what that piece is when I find it on my garage floor. And I know it will probably happen eventually.
I was tupperwared down to the front pulley and had a push pin left over when it was back together. When I am bored sometime in the next couple weeks I will remove panels until I find an empty hole to install it in. Might look at the parts diagram to see if I can figure it out.
2018 RT Ltd - Asphalt Metallic - East Valley of Phoenix
2018 RT Ltd Chrome - Champagne Metallic - Lake Stevens, Wa
(Champagne/Hooker) Magic Mirrors, 360 LED head lights, BajaRon sway bar, H&R springs and shock adjusters, dash cam, foam grips, third brake light 4 LED strobe for 7 seconds and then on steady, rear LED turn signals/8 ohm 50W resistors, sequential turn signals on front fenders, Vredestein and PPA Orb wheels on front and General out back, and driver backrest.
Things that move between machines: Ikea sheep skins, Zumo XT GPS, and extra tools. Hooker is going to be my summer trike up North; and Hookie my winter trike down South.
(Asphalt/Hookie) Elka shocks on front - BajaRon sway bar, OEM driver's backrest, LED headlights, dual USB with voltmeter, dash cam, foam grips - Magic Mirrors - front tires Vredestein Quatrac SL on PPA ORB Chrome wheels.
I was tupperwared down to the front pulley and had a push pin left over when it was back together. When I am bored sometime in the next couple weeks I will remove panels until I find an empty hole to install it in. Might look at the parts diagram to see if I can figure it out.
Hey Snoking1127, that pushpin must be mine. I came up short one just the other day when iI was working on my spyder. How does that happen?
I was tupperwared down to the front pulley and had a push pin left over when it was back together. When I am bored sometime in the next couple weeks I will remove panels until I find an empty hole to install it in. Might look at the parts diagram to see if I can figure it out.
Originally Posted by 2dogs
Hey Snoking1127, that pushpin must be mine. I came up short one just the other day when iI was working on my spyder. How does that happen?
I'm sure it's those 'black holes' that things fall into, never to be seen again!!
I reckon they are actually BRP's early attempts at developing/using 'worm holes' for interstellar travel, and once again, we, the unsuspecting owners, are the 'un-documented Beta testers' of this burgeoning technology!!
Let's just look at the evidence for this - anything that falls into these 'black holes' disappears doesn't it? Never to be seen again - at least not by you! That's cos it's instantly translated across the space/time continum into someone else's Spyder/Ryker, only at this stage of the technology's development, the destination targetting is done randomly - it could be sent any-where, or any-when.... it just hasta be another Spyder/Ryker with a 'black hole' to receive the translated gear into. So when it's least expected, these translated items will simply appear at the destination end - probably in the form of an extra nut/bolt/push pin on the floor after you've put your machine back together again; or if the 'translation' didn't work quite so well as it should, then it might end up as a drip or 6 of a mysterious 'oil like substance' found in a puddle in one of the underbody trays, or as an inexplicable drip/drips on the floor under your Spyder/Ryker!! Both of these mysterious events do happen, don't they!?! You and I both know it, so there you are! It's real!!
Go on, tell me you've never lost something that's fallen into one of those 'black holes'!! Or if your Spyder/Ryker is a 'receiver', are you sure that you've never found any mysterious 'oil like substances' either caught in one of those underbody trays or found as drips on the garage floor under your machine! Heck, if you were lucky enough to score a Spyder/Ryker that's been equipped with both 'sending' black holes and 'receiving' black holes, you might even have experienced BOTH of those!! Have you?!? What more do you want? An admission from BRP? Not gonna happen - look'it the Kenda tires thing.... it's more'n ten years down track now, and they STILL won't admit they were suckered into that particular deal!
Sorry, but I saw those other posts, and I just hadta!! Besides, she made me do it!!
I would be willing to wager that at least some of those "black holes" that Peter mentioned actually dump out "down under" and he has a PILE of those items sitting in a corner of his shed.