-
Active Member
Luggage rack
Has anyone installed the luggage rack on the topcase for the 2020 RT or the F3? If so, can you explain how a bag is attached or tied down to it? Please provide pictures if you can. Thanks.
-
Very Active Member
It depends on the attaching features of the bag. If it has none, ROK Straps are great, or there's myriad of straps out there. If nothing else, a cargo net will work.
I have a bag the has an adjustable click lock at each corner. It's like it was made for my Show Chrome rack.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
-
Very Active Member
The rack sits a good 1/2" above the trunk and has numerous holes where a luggage strap will fit. One reason I bought was just to protect all the shiny/ black plastic on the trunk and to give me a place to set my helmet down.
The bag on the rack is an ancient leather trunk, and I use bungees with boat-style hooks to hold it in place.
IMG_4642.jpgIMG_4642.jpgIMG_4643.jpg
2020- RT Limited
Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
FOBO2 TPMS
Aluma MCTXL trailer
BRP hitch
Big Bike Parts wiring harness
Permanent Smile!!!
-
Very Active Member
Sorry - don't know why iPhone pictures seem to show up sidesways.
2020- RT Limited
Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
FOBO2 TPMS
Aluma MCTXL trailer
BRP hitch
Big Bike Parts wiring harness
Permanent Smile!!!
-
Active Member
Thanks. Where did you purchase the rack?
-
Active Member
Great pics... Is that the factory rack or aftermarket? Beautiful bike
Grandpa Pete
Peter & Kim Pontinen
2020 RTL Dark Marsala
-
Very Active Member
It’s the factory rack, and I found it on Amazon. Installation was easy (just 4 screws), but measure, measure, measure to ensure that you get it on straight. All the surfaces and edges are curved which makes measuring less than straightforward. Also, cover the top with masking tape to avoid scratches.
2020- RT Limited
Chalk White, Can-Am rear passenger armrests, Comfort Seat, Grip puppies, RAM Cup Holders, Providence RAM Mount
FOBO2 TPMS
Aluma MCTXL trailer
BRP hitch
Big Bike Parts wiring harness
Permanent Smile!!!
-
Very Active Member
I have the factory one also
4" Stubby antenna, Dual arm LEDs Fender LEDs, Back Rest, Luggage Rack, Run, Brake and Strobe for top case, Mirror LEDs,Back Off decal on mud flap, reciptal for Battery Tender and Heated Gear, mirror LEDs that stay on or work with blinkers, GPS, side bag red LEDs, Top cuff with Ram Ball phone holder And USB power, Top cuff with drink holder and passenger cup holder. Also grilles in front of radiators, also spyclops. Garmin 595 GPS, Freedom windshield. Also glove box console And trunk wrap in carbon fiber from wrap my spyder. BRP comfort seat. added garage opener with rocker switch in center console to match other switches. And I have added Elka stage 2 shocks.
-
I use bungee cords and/or straps that hook to the rack. Used on many long trips, works great !
Yellow 2013RT SE5(Previous)
Champagne Metallic 2017RT LTD SE6
-
Just remember that the rack has a weight limit and it isn’t much! Don’t strap down a loaded suitcase to it.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|