Installed Lamonster's Bright Ryder LED light under the frunk lid. Found a way to route the wiring that didn't involve drilling... I'm stubborn that way. Can't "test ride" as it looks like the Carson Valley is about to get its promised thunderstorms and lightning makes me tend to ! We had a ryde up Mt. Rose and down along the west side of Lake Tahoe this morning, anyway. Good ride with 8 bikes and 3 Spyders, not much traffic yet and didn't get wet, I call it a win.
Last edited by grumpyoldretiredcop; 05-29-2023 at 06:56 PM.
That skin fits very nicely. May I ask where your ordered it from?
Thank you.
Hi Pooch, that looks like the Misty Mountain Sheepskin cover I have on my Spyder.
I bought mine from Lamonster Garage and love it. Warm in the winter and cool in the summer.
Washed the bugs off after a 5-day trip thru the Black Hills, Wyoming, Montana, and home. Little over 1400 miles. Black Hills ride was with a group of 17 bikes. Rest was 4 of us peeled off for a solo return, something we do every year.
Got my new Corbin 1 piece seat today. Will post a couple of pics when I get it on this weekend. Can't wait to test it out. Looks really nice. Also waiting for a hitch and cooler rack that I'm going to convert into a golf club holder.
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Removed oem exhaust and installed BMW Exhaust tip
Installed Led underglow,
Disabled DESS with BUDS2,
Installed USB phone charger with voltage indicator,
Installed Insta 360 X3 with hardware,
Swapped my Ram mount from my Honda Rebel to Spyder
and most of all, being nice to the wife because I will install more mods to this Black Spyder...
2020 BLACK SPYDER F3S
BMW EXHAUST TIP
PUIG WINDSHIELD
TUFSKINZ TANK PROTECTOR CARBON FIBER
DISABLED DESS
LED LIGHTS
RAM MOUNT
INSTA 360 X3
SENA 10C PRO BLUETOOTH
ALPINESTARS JACKET
SCORPION EXO ST 1400 CARBON HELMET
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
I received my hitch, cooler rack (which I'm converting to a golf bag holder) and new windshield from canamspyderaccessories and am planning on installing them at some point this week. Can't this weekend because I have to tear up the kitchen floor tile and replace it with contractor grade pergo. Fun, fun.
Retired U.S. Coast Guard 76-97
Shad bags
Lamonsters 2.0 usb dual power plate
F3 ultimate boards
LED arc lights
Lidlox helmet extender
Lamonsters top cuff with Ram ball and phone holder.
Lamonster billet sway bar end links
BRP driver backrest
LED Volt meter
BIW Cat Delete pipe
Route 129 windscreen/ some time's
Pedal Box Pro
Spyderpops A- Arm LED Lights
Last edited by Dasmoetorhead; 06-24-2023 at 06:32 PM.
Retired U.S. Coast Guard 76-97
Shad bags
Lamonsters 2.0 usb dual power plate
F3 ultimate boards
LED arc lights
Lidlox helmet extender
Lamonsters top cuff with Ram ball and phone holder.
Lamonster billet sway bar end links
BRP driver backrest
LED Volt meter
BIW Cat Delete pipe
Route 129 windscreen/ some time's
Pedal Box Pro
Spyderpops A- Arm LED Lights
Installed F4 Customs wide windshield with adjustable vent, stock height. Also Sling Mods riser kit. Then installed the CanAm led floorboard lighting. First time I had all the side panels off. Lot of work to run the wiring. Lights all worked. All back together and one side didnt work!! Grrrr. Side panels all off again on one side ( much faster than first time) and found connector pinched by the side cover and one pin pulled out. Lights are very bright. Hope not too distracting at night.
Jim
2022 Spyder RTL- dark trim
1969 Plymouth Barracuda 340-S Fastback
1969 Barracuda, 6.1 Hemi restomod, convertible
1970 Plymouth Superbird, 440-6bbl
Nothing, it was in the garage, due the rainy weather.
This coming week I'll put some miles on it.
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Installed Rear Trunk Organizer,
Lamonster top cuff
Cup Holder
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
I didn't do it, the dealer did, but I had the brake switch recall done.
The one thing I did do was fix the trunk piston I bought from slingmods. Apparently I lost a spacer or small washer because when I tightened the screw, it made it difficult to open and close the lid. So I ended up using a washer I had to create space. Works great now. Also installed the wider windshield I bought from canamspyderaccessories.
I recently had my new 2023 Spyder Sea-to-sky ceramic coated from a friend of mine who runs a detailing business (802 Marine) in Vermont. I was very happy with the results. The ceramic coating helps to protect the clear coat and paint from scratches, bird dropping, bugs and road grime in general and seems to stay much cleaner or at least easier to keep clean. I've been wanting to do this because the paint on these spyders seems very soft and prone to scratching.