-
Ryker Test Rides and What RPM at 60mph?
In Arizona Ride Now (who have most of the dealerships) say there won't be any test or demo ride days.
How come people back East are getting to ride them?
The most obvious metric for determining how suitable these are at highway speeds is to know the rpm at 60 or 75 mph.
Does anyone know rpm @ 60 mph or @ 75 mph?
Thanks
Aprilia Mana 850GT, 1988 BMW K75S, Piaggio MP3 400 (sold), Moto Guzzi Nevada 750 (modified), Puch (Sears Allstate SR175), 2010 Honda Insight Hybrid
-
Member
The rpm will vary at any given mph, the more power that is needed the higher the rpm. For example going up hill will have a higher rpm than going down hill at the same mph. The cvt transmission works that way, even the weight of the rider can affect the rpm at a given mph.
2015 RT Limited
Show Chrome Drivers Backrest
Show Chrome Passenger Armrest
Show Chrome trunk Rack
Ron's Shock Adjusters
Ron's Sway Bar
BRP Trailer Hitch
CB Communications System
Spyderpop's Bump-Skid
Spyderpop's Belt Guard
JT's Rear Fender
-
Very Active Member
The screen doesn't appear to have RPM and Speed on it at the same time so its hard to tell. You can bet the RPM at 60 moh is about 5,200 or so and the 1330 would is about 3,700 on mine So the 900cc is going to have a NICE higher speed Hum?
2015 F3 sm6, Custom Dynamics fender lights.
Sea Doo GTI-SE 90 Jet Ski!!
-
Very Active Member
They do have speed and RPM at the same time as I recall. I was over 60 mph but can't remember the RPM. It appears at the bottom right of the screen when selected from the menu.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Originally Posted by Smutt
The rpm will vary at any given mph, the more power that is needed the higher the rpm. For example going up hill will have a higher rpm than going down hill at the same mph. The cvt transmission works that way, even the weight of the rider can affect the rpm at a given mph.
I'm quite familiar with CVTs of the type used by Can Am and the way they work can vary according to load and speed.
However, over a certain engine speed they tend to be locked up at a constant speed and a constant load, such as when cruising at 60 or 75 mph on a reasonably level piece of roadway.
Thanks anyway.
Last edited by Trevor G; 11-18-2018 at 10:58 PM.
Aprilia Mana 850GT, 1988 BMW K75S, Piaggio MP3 400 (sold), Moto Guzzi Nevada 750 (modified), Puch (Sears Allstate SR175), 2010 Honda Insight Hybrid
-
Originally Posted by Highwayman2013
They do have speed and RPM at the same time as I recall. I was over 60 mph but can't remember the RPM. It appears at the bottom right of the screen when selected from the menu.
How did you get to go for a test ride?
Aprilia Mana 850GT, 1988 BMW K75S, Piaggio MP3 400 (sold), Moto Guzzi Nevada 750 (modified), Puch (Sears Allstate SR175), 2010 Honda Insight Hybrid
-
I've seen anywhere from about 5,900 to 6,100 rpm at 60 mph with myself and my wife on the 600. Both of us with gear on are probably in the 300lb range. Haven't ridden alone, yet.
-
Active Member
2018-10-27 (1)_LI.jpg it does show both rpm and mph on same screen
-
Originally Posted by Freezefm
I've seen anywhere from about 5,900 to 6,100 rpm at 60 mph with myself and my wife on the 600. Both of us with gear on are probably in the 300lb range. Haven't ridden alone, yet.
Thanks for that.
Now to see what it is on the 900
Aprilia Mana 850GT, 1988 BMW K75S, Piaggio MP3 400 (sold), Moto Guzzi Nevada 750 (modified), Puch (Sears Allstate SR175), 2010 Honda Insight Hybrid
-
Very Active Member
Ron stated 60mph is 5,500-5,600 rpms.
2015 F3 sm6, Custom Dynamics fender lights.
Sea Doo GTI-SE 90 Jet Ski!!
-
Very Active Member
Proshop Motorsports in Henderson NV had a demo unit the weekend of Aimexpo in Las Vegas.
Last edited by Highwayman2013; 12-21-2018 at 11:59 AM.
Reason: DELETE
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Very Active Member
Originally Posted by Trevor G
How did you get to go for a test ride?
Proshop Motorsports in Henderson NV had a demo unit the weekend of AIMEXPO.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Active Member
Originally Posted by Trevor G
In Arizona Ride Now (who have most of the dealerships) say there won't be any test or demo ride days.
How come people back East are getting to ride them?
The most obvious metric for determining how suitable these are at highway speeds is to know the rpm at 60 or 75 mph.
Does anyone know rpm @ 60 mph or @ 75 mph?
Thanks
Going riding today will tell you tonight. I have the 900cc.
-
SpyderLovers Sponsor
Originally Posted by Trevor G
How did you get to go for a test ride?
Buy one!
That's how I got my 'Test Ride' anyway...
Mine runs about 5,500 cruising at 60 mph. But it varies depending on load so you can't nail it down like with a geared transmission.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Active Member
Originally Posted by Trevor G
In Arizona Ride Now (who have most of the dealerships) say there won't be any test or demo ride days.
How come people back East are getting to ride them?
The most obvious metric for determining how suitable these are at highway speeds is to know the rpm at 60 or 75 mph.
Does anyone know rpm @ 60 mph or @ 75 mph?
Thanks
60 mph 5540 rpm
75 mph 6380 rpm
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|