-
Blanks and connectors
Hi, everyone. First time post for me. I just recently got a 2018 F3-S, and I知 having a great time riding it. This is the first time riding less than 4 wheels since college 50 years ago.
I知 starting to want to add things, and I took a look at the two blanks on either side of the ignition switch. I was able to lift the trim piece surrounding the switch, and tried to remove one of the blanks. To my surprise, there is wiring and a connector attached to the back side of the blank. I also tried to remove the connector from the blank, but it seems attached quite securely.
My my two questions:
1). Does anyone know what the wiring is for?
2). Can I remove the connector? Should I just pull harder? I知 afraid of breaking something.
Thanks for any help!
- David
-
Very Active Member
On my 2016 the covers were on the right the foglite circuit and the left is for heated grips.
-
Active Member
What Rattlebars said, also if you look closely you will see a clip release that will let you disconnect the harness.
Joe
Lamonster Bright Ryder, Lamonster Bright Tail Lighter, Lamonster H4 LED Headlights, Lamonster LED Fog Lights, Lamonster Fog Light Ring Combo, Rox Riser
Lamonster Driver Back Rest, Lamonster Frame Mount Drink Holder.
Lamonster 15" Freedom Shield Wind Shield ******* USA flag
Freecom 2 head sets
Mirror Wedgies by Squared Away
Motorcycle Dave's Tachform phone cradle
Spyderpops Turnsignal LEDs
Spyder Sisters Shade
Spyderpops LidLocs
Spyderpops front fender LEDs by Show Chrome
Motorcycle Dave's Gel seat insert
-
Thank you so much, Rattlebars and Joe!
So if I want to install and connect Lamonster痴 fog lights and rings, I assume that I can use the right side wiring at least for the fog lights?
David
-
Originally Posted by DavidJS
Thank you so much, Rattlebars and Joe!
So if I want to install and connect Lamonster痴 fog lights and rings, I assume that I can use the right side wiring at least for the fog lights?
David
The foglights from both Lamont and TrIcLED plug right in to the connectors and they come with the switch too.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Excellent! Thank you SpyderAnn!
David
-
Very Active Member
-
Originally Posted by akspyderman
Thanks!
-
Grips not heating.
I posted this in another thread but I will post here as well. Yesterday our heated grips were installed by the dealer. They are not working. On this thread I see that mentioned above, the heated grip plug is on the left and the fog light plug is on the left for plug and play operations. If this is correct, then I know the problem. They plugged our grips up in the right side. I will move it to the left side tomorrow and see if that fixes the problem.
-
Active Member
The heated grips are on the left and the fog lights are on the right when seated on the
Joe
Lamonster Bright Ryder, Lamonster Bright Tail Lighter, Lamonster H4 LED Headlights, Lamonster LED Fog Lights, Lamonster Fog Light Ring Combo, Rox Riser
Lamonster Driver Back Rest, Lamonster Frame Mount Drink Holder.
Lamonster 15" Freedom Shield Wind Shield ******* USA flag
Freecom 2 head sets
Mirror Wedgies by Squared Away
Motorcycle Dave's Tachform phone cradle
Spyderpops Turnsignal LEDs
Spyder Sisters Shade
Spyderpops LidLocs
Spyderpops front fender LEDs by Show Chrome
Motorcycle Dave's Gel seat insert
-
I switched them out yesterday and now they work great. I called the dealer and he is going back to the techs about it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|