Results 1 to 5 of 5
  1. #1
    Active Member
    Join Date
    Jul 2018
    Location
    Lake Stevens, WA
    Posts
    95
    Spyder Garage
    1

    Default Doggone SpeedBumps *argh* - What Part/# do I need?

    Have floorboards. About 100' from speedbump to space I parked in. Went to reverse into space and that's when it was noticed... floorboard was dragging. All else is intact, tho fairly certain will be upgrading the floorboards in this process. In the meantime, can't use any floorboard HELP! Thank you
    20180913_130151.jpg
    2009 GS , MSD wires Red/Black

  2. #2
    Very Active Member sealfloorboards's Avatar
    Join Date
    Aug 2010
    Location
    Newberg, Or.
    Posts
    2,180
    Spyder Garage
    0

    Default

    Ouch!!! What a bummer. When I go over a speed bump, I try to go over at an angle so each tire goes one at a time. Helps greatly to not bottom out. You might check out my Seal RS SE5 Floorboards. They are very tough and I'v never had a problem with speed bumps or bottoming out on either my RS or RT. Contact me directly and I will drop the $45. Shipping charges.
    Good luck, and ride in comfort,
    John
    Last edited by sealfloorboards; 09-14-2018 at 12:30 PM.

  3. #3
    Active Member
    Join Date
    Jul 2018
    Location
    Lake Stevens, WA
    Posts
    95
    Spyder Garage
    1

    Default

    thank you. however, at the moment, just trying to identify a Part Nomenclature/# to search for. coming up with bupkiss at www.canampartshouse.com, no matter the diagram I zoom in on.
    2009 GS , MSD wires Red/Black

  4. #4
    Very Active Member Snowbelt Spyder's Avatar
    Join Date
    Nov 2015
    Location
    Chardon, OH
    Posts
    1,357
    Spyder Garage
    0

    Default

    Would that be a Foot Support, or Foot Peg Support, as shown on Body and Accessories Rear diagram?
    Last edited by Snowbelt Spyder; 09-14-2018 at 12:47 PM.


    Doug

    2023 RT Limited, RT 622, BUDS/BUD2 Megatech/Megatronic

    ”Freedom is not a loophole”

    F4 Customs SWCV, Ultimate, Lidlox, Adjustable Side Vents, Leather Like Grips, SS Grills, Centramatic, Garmin XT2, BajaRon Original Sway Bar w/ Lamonster links, P238

  5. #5
    Active Member
    Join Date
    Jul 2018
    Location
    Lake Stevens, WA
    Posts
    95
    Spyder Garage
    1

    Default


    LH Front Foot Peg Support

    THANK YOU!!!


    PN#: 705003335
    2009 GS , MSD wires Red/Black

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •