-
F3 passenger seat removal
Hi All,
I am trying to remove the passenger seat and this thing will not open.
I was holding the key turned and I can see while I am picking the left side of the seat that the pin is not released from the latch
Any idea will be welcomed.
Thanks
Sharon
This message was sent between rides
-
Originally Posted by szohar
Hi All,
I am trying to remove the passenger seat and this thing will not open.
I was holding the key turned and I can see while I am picking the left side of the seat that the pin is not released from the latch
Any idea will be welcomed.
Thanks
Sharon
Sorry for the dumb question, but you are pushing the key in and holding it in while turning to the seat release position, correct?
-
Lift from the back of the seat when removing it while the key is depressed and turned to the seat position.
-
Originally Posted by Spydel
Lift from the back of the seat when removing it while the key is depressed and turned to the seat position.
I sure tried to do so multiple times, thanks.
This message was sent between rides
-
Originally Posted by rocketman74
Sorry for the dumb question, but you are pushing the key in and holding it in while turning to the seat release position, correct?
Sure I do.
This message was sent between rides
-
Anyone aware of how to access the cable that releases the back seat?
-
Have you tried this way, before you push and turn the key try this push the back of the seat down with one hand then with the other push and turn the key then while key is turned try lifting the back of the seat. Because you could have something under the seat holding pressure up on the catch not allowing it to release.
-
Tried...
Originally Posted by Bruce B
Have you tried this way, before you push and turn the key try this push the back of the seat down with one hand then with the other push and turn the key then while key is turned try lifting the back of the seat. Because you could have something under the seat holding pressure up on the catch not allowing it to release.
Thanks for the idea, just tried it now with no luck. I need to find a way to pull the cable from somewhere, but I can't get to it.
This message was sent between rides
-
SpyderLovers Sponsor
Bring it to me in Tracy
I’ll get it open! We are in Tracy Sunday, Oroville on Monday. Come see me, Sharon. Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Sharon come to Rich’s on Sunday and we can look at it.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
There you go double teamed by Squared Away! Or you can take to Spirit! Should be covered by warrantee.
White 2013 Spyder RT Limited. BajaRon Swaybar, Custom Dynamic Third Brake Light. Ultimate Custom Black and White seat with driver and passenger back rest. Gloryder Led Wheel lights.Custom Dynamics Led Bright sides, Amber and Red Fender lights, and Saddle Bag Bright sides.
2016 F3 Limited Intense Red Pearl. Lidlox, BRP Driver Back Rest, BRP Passenger Back Rest,Fog Lights, GPS, Signature Light! Custom Dynamics LED Bright Sides, Amber and Red Fender lights, and Saddle Bag Bright Sides.
-
Originally Posted by SpyderAnn01
Sharon come to Rich’s on Sunday and we can look at it.
Thanks guys.
I will be at Rich house tomorrow, are you guys going to be there?
We will be going to NorCal on Tuesday (but not sure I will ride the F3).
Sharon
This message was sent between rides
-
SpyderLovers Sponsor
Tracy
Yes, we will be there. Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
SpyderLovers Founder
I’m replacing one on my wife’s bike now. It was stuck bad. Turned out to be a fraid cable you can release it without pulling the right side panel but it’s easer if you do Once the panel is off you’ll see the cable. Just pull it up and twist it forward or backward while pulling up on the right side of the seat. It will pop right off. Chances are you have a bad cable like us.
-
SpyderLovers Sponsor
Thanks
Originally Posted by Lamonster
I’m replacing one on my wife’s bike now. It was stuck bad. Turned out to be a fraid cable you can release it without pulling the right side panel but it’s easer if you do Once the panel is off you’ll see the cable. Just pull it up and twist it forward or backward while pulling up on the right side of the seat. It will pop right off. Chances are you have a bad cable like us.
I’ll try that. Thanks! Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Originally Posted by Lamonster
I’m replacing one on my wife’s bike now. It was stuck bad. Turned out to be a fraid cable you can release it without pulling the right side panel but it’s easer if you do Once the panel is off you’ll see the cable. Just pull it up and twist it forward or backward while pulling up on the right side of the seat. It will pop right off. Chances are you have a bad cable like us.
Thanks, I was trying this, I removed the right panel, pushed and pulled the cable but this cover will not come off.
Any new ideas are welcomed.
Thanks
Sharon
This message was sent between rides
-
SpyderLovers Sponsor
Cable
Follow the cable to the switch. Remove cable from switch. Pull on ferrule while holding sheath. Should release seat. Replace cable.
Joe
Joe Meyer
Dealer for the Outlaw/ROLO laser Alignment system
-
Thanks Joe, I will try it this week.
Sharon
This message was sent between rides
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|