-
Vent install question
Hell guys. I am about to install a set of vents and my question is .is there any thing else I need that does not come in the kit from BRP.thanks….
-
vents
i took the panels to the dealership after i taped up the area to be cut out and they have a template to mark for the cutout
-
Thank you
I plan on doing this myself. I only hope it comes with some instructions.
Last edited by MOSESS; 08-13-2018 at 06:25 PM.
-
Very Active Member
Here's a pic of the back of my right side panel cut out for the vents.
Back of upper panel with cutout for Vent.jpg
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020 |
|
-
Active Member
Once you get up enough nerve to make the first cut, it gets easier after that. Good Luck
-
vent install
I only drilled two one in holes and worked great without cutting to much out. Doc riverside sent instructions so he might still have them. Not scary if you are patient.
-
Thank you
I opened up the box and there where no instructions or template ...does any one have one I can buy or use . not afraid to cut just want to read up on what needed before I start.
-
Very Active Member
Do a search for Doc Riverside, he has all of the instructions and info. on the forum here.
How old would you be if you didn't know how old you were?
-
Hello there
Guys the mod is done. making the cuts where not that bad at all. on to the next mod. Dave thank you for the info on the flash. I will be getting that done during the winter months.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|