I have seen pictures and watched videos of the Spyder F3-P. It has the Black aluminum luggage on the bike.
What I want is the rack that holds the top case on the bike, you can see the bike in the commercial division on the BRP site.
The rack itself bolts where the passenger handgrips go, it looks like the handgrips are removed for the rack to install. The rack covers the passenger seat so it will be a solo bike after install.
Does anyone know the part number for the rack kit? I have know idea why BRP would not make this available, I just want the rack to install a black aluminum top case on my bike. I don't want saddle bags.
A contact number to talk to someone about it would be welcome.
It will be similar but lower and longer, the height will be almost even with the drivers seat and the length almost even with the back tire giving somewhat of a sport bike look.
The passenger seat will need to be removed to keep the profile and center of gravity as low as possible.
For the 2 spyder family or solo rider that doesn't need the passenger seat this should serve them well.
The grab bars can stay or go, but it will clear the top of the bars slightly if those are needed for tie down points for large bags.
The largest top case, Harley Tour Pak or pet carrier should fit.
It will also serve as an effective fender for those that don't like the looks of the stock fender.
A realistic time will probably be around Feb.
It will be similar but lower and longer, the height will be almost even with the drivers seat and the length almost even with the back tire giving somewhat of a sport bike look.
The passenger seat will need to be removed to keep the profile and center of gravity as low as possible.
For the 2 spyder family or solo rider that doesn't need the passenger seat this should serve them well.
The grab bars can stay or go, but it will clear the top of the bars slightly if those are needed for tie down points for large bags.
The largest top case, Harley Tour Pak or pet carrier should fit.
It will also serve as an effective fender for those that don't like the looks of the stock fender.
A realistic time will probably be around Feb.
Thanks Capt Jim
Good to hear, if you can update with pictures that would be great. Hopefully you will have them for sale before March. LOL
It will be similar but lower and longer, the height will be almost even with the drivers seat and the length almost even with the back tire giving somewhat of a sport bike look.
The passenger seat will need to be removed to keep the profile and center of gravity as low as possible.
For the 2 spyder family or solo rider that doesn't need the passenger seat this should serve them well.
The grab bars can stay or go, but it will clear the top of the bars slightly if those are needed for tie down points for large bags.
The largest top case, Harley Tour Pak or pet carrier should fit.
It will also serve as an effective fender for those that don't like the looks of the stock fender.
A realistic time will probably be around Feb.
Sounds like something I would be interested in for sure. I especially like that I wouldn't have to remove the grab bars, as I don't want to remove my saddlebags (which I think I'd have to do to remove the bars).
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO