BAJARON's wire set

[tgflatt]

I want to replace the wires and plugs on a 2010 RT with better ones than what came with it. I read in the owners manual that you should not use UN-shieled wires as they could cause interference with the engine control mod. has anybody who has tried the set from BAJARON's had any problems?

[Highwayman2013]

I did our 2012 RTL a couple years ago. Wires are very good quality with no issues.

[quasi]

i'm running Rons wires, good wires.

[BoilerAnimal]

Put a set of his wires and plugs on our Spyder this spring and put new vacuum hoses on from NAPA (the silicone ones). VERY HAPPY!!!

[pegasus1300]

I put Ron's wires on my RT last summer and they have been good so far.

[Spyder_Cowgirl]

Ron's wires have, probably, some of the best shielding available for the Spyder -- they are certainly better than the OEM plug wires and will NOT degrade over time as the originals will. I learned this the hard way when the spark plugs were replaced during service on my 2012 RT, but not the plug wires. Suddenly, I had an extreme amount of static in my CB that went away completely once Ron's wires were used to replaced the old OEM ones.

All the best …. Ann

[BajaRon]

The low resistance, spiral wound, solid core wires in both the MSD and Accel wire sets I sell produce less radio/computer interference noise than the OEM wires while at the same time, delivering more ignition energy to the spark plugs. Plus they last a lot longer.

Honestly, I never intended to sell these wire sets. I simply built a set for my Spyder after discovering the shortcomings of the original set that I needed to replace. Others found out about it and wanted me to make them a set as well. Next thing In knew I was getting phone calls and emails from all over.

[pegasus1300]

Well thanks for seeing the need and filling it.

[yellow peril]

get a set of wires and plugs from Ron. The small electrode plugs you won't be sorry
dave