Parking Brake Switch Symbol

[TRBorslien]

I tried a few searches in the forum, but wasn't able to find an answer to my question

My parking brake switch works great, but the symbol is almost completely worn off. A new switch (710002353) is $56, which is more than I want to spend for a new symbol.

My thought was to find an appropriately sized decal. No luck with Google searches on that front. I realize that a decal would eventually require replacement, but I could replace eleven $5 decals before I reached the cost of a replacement switch!

Any suggestions or past solutions?

Thanks in advance!

[Chupaca]

Get some sticker paper for your printer and print up a sheet of them. If your not stuck on having the original Micheals (arts and craft stores) have a nice variety of vinyl letters that you could stick on.

[ARtraveler]

Leather black solution spread over the key symbol. Wipe off the excess and you should have "new" printing. Unless, the emblem is worn down.

[MercerLake]

You could consider a blank switch as another anti-theft device. Or use a soldering iron to engrave a label into the switch rocker plate and then fill the engraved label with white paint. Never wear off again.

[JayBros]

If yours is in the same position as mine, leftmost one, why bother; it shows your Spyder gets lots of use. Ride more, worry less.