F3-S SE6 Handlebar Diameter

[SmokeyXXX]

Good Afternoon All -

I have an audio system for my F3-S SE6 and the clamps that came with the speakers are too small. Can anyone tell me what size replacement clamps to get?

[ofdave]

I believe the bars are 1 1/8".
Clamps that size may not be all that common for what you're doing.
What type of clamp does it take?
Maybe a pic?

[SmokeyXXX]

I believe the bars are 1 1/8".
Clamps that size may not be all that common for what you're doing.
What type of clamp does it take?
Maybe a pic?

This is a photo of the clamp that came with the speakers. There are screws on each side that hold it together to clamp onto the bars.

Clamp.jpg

[monkeyboymorton]

I thought they were 7/8" / 22mm?

[bscrive]

Those clamps should have come with some rubber pieces you put those in to make up the space. But looking at the clamp it looks like you bought ones for 1 inch bars and I believe there are 1 in 1/8 inch bars on the F3

[monkeyboymorton]

Yeah I'm talking rubbish, definitely 1+1/8" diameter from some previous threads.

[ofdave]

hey, smokey
sent you a PM about some 1 1/8" clamps I have
don't look at what they are for-look at them for what they may do for you
it's an Ebay link and I don't think we're allowed to post that here although no vendor here sells them

[fatenhappy]

Good Afternoon All -

I have an audio system for my F3-S SE6 and the clamps that came with the speakers are too small. Can anyone tell me what size replacement clamps to get?

I just pulled my bars apart about a week ago and put a set of outside micrometres on them to solve this exact same question once and for all, as I was originally thinking of replacing them something more 'swept'..

Where they go through the supported head stock is 28 mm = 1 1/8" BUT when you take both the hand grip section off that inner main section there is reduce to 22mm = 7/8"

I had to remove everything (so I thought) to lay my stock bars down - (backwards and down about another 2" to relieve the stressors on my shoulders) then I found out I need not have gone to all that trouble to do this ... Personally I really dislike ape hanger type bars for that very reason ..

[SmokeyXXX]

hey, smokey
sent you a PM about some 1 1/8" clamps I have
don't look at what they are for-look at them for what they may do for you
it's an Ebay link and I don't think we're allowed to post that here although no vendor here sells them

Hi there!

I'm unsure of what mm screw attaches the speakers onto the clamps - so I don't even know which clamps to get.

[SmokeyXXX]

Am I able to hard mount these to my windshield fasteners? I have a blue ridge.