-
Member
F3-S SE6 Handlebar Diameter
Good Afternoon All -
I have an audio system for my F3-S SE6 and the clamps that came with the speakers are too small. Can anyone tell me what size replacement clamps to get?
2015 Can-Am Spyder F3-S SE6
Voodoo Shorty Double-Barrel Exhaust in Black Matte Finish
Lamonster Garage Bar Clamp w/ RAM Mount and X-Grip
Lamonster Garage Spyder Decals
Wishlist: Passenger Backrest, Sound System...
-
Very Active Member
I believe the bars are 1 1/8".
Clamps that size may not be all that common for what you're doing.
What type of clamp does it take?
Maybe a pic?
2017 F3, SM6-basic black, plain and simple
-
Member
Originally Posted by ofdave
I believe the bars are 1 1/8".
Clamps that size may not be all that common for what you're doing.
What type of clamp does it take?
Maybe a pic?
This is a photo of the clamp that came with the speakers. There are screws on each side that hold it together to clamp onto the bars.
Clamp.jpg
2015 Can-Am Spyder F3-S SE6
Voodoo Shorty Double-Barrel Exhaust in Black Matte Finish
Lamonster Garage Bar Clamp w/ RAM Mount and X-Grip
Lamonster Garage Spyder Decals
Wishlist: Passenger Backrest, Sound System...
-
Active Member
I thought they were 7/8" / 22mm?
| 2015 F3-S | Heated Grips | USB Ports | RAM X-Grip | RT Sway Bar | '2 Up' Rear Shock | SHAD Bag Kit | Oxford Aqua 50 Dry Bag | BRP Rider Backrest |
-
Very Active Member
Those clamps should have come with some rubber pieces you put those in to make up the space. But looking at the clamp it looks like you bought ones for 1 inch bars and I believe there are 1 in 1/8 inch bars on the F3
-
Active Member
Yeah I'm talking rubbish, definitely 1+1/8" diameter from some previous threads.
| 2015 F3-S | Heated Grips | USB Ports | RAM X-Grip | RT Sway Bar | '2 Up' Rear Shock | SHAD Bag Kit | Oxford Aqua 50 Dry Bag | BRP Rider Backrest |
-
Very Active Member
hey, smokey
sent you a PM about some 1 1/8" clamps I have
don't look at what they are for-look at them for what they may do for you
it's an Ebay link and I don't think we're allowed to post that here although no vendor here sells them
Last edited by ofdave; 04-23-2018 at 04:59 PM.
2017 F3, SM6-basic black, plain and simple
-
Originally Posted by SmokeyXXX
Good Afternoon All -
I have an audio system for my F3-S SE6 and the clamps that came with the speakers are too small. Can anyone tell me what size replacement clamps to get?
I just pulled my bars apart about a week ago and put a set of outside micrometres on them to solve this exact same question once and for all, as I was originally thinking of replacing them something more 'swept'..
Where they go through the supported head stock is 28 mm = 1 1/8" BUT when you take both the hand grip section off that inner main section there is reduce to 22mm = 7/8"
I had to remove everything (so I thought) to lay my stock bars down - (backwards and down about another 2" to relieve the stressors on my shoulders) then I found out I need not have gone to all that trouble to do this ... Personally I really dislike ape hanger type bars for that very reason ..
-
Member
Originally Posted by ofdave
hey, smokey
sent you a PM about some 1 1/8" clamps I have
don't look at what they are for-look at them for what they may do for you
it's an Ebay link and I don't think we're allowed to post that here although no vendor here sells them
Hi there!
I'm unsure of what mm screw attaches the speakers onto the clamps - so I don't even know which clamps to get.
2015 Can-Am Spyder F3-S SE6
Voodoo Shorty Double-Barrel Exhaust in Black Matte Finish
Lamonster Garage Bar Clamp w/ RAM Mount and X-Grip
Lamonster Garage Spyder Decals
Wishlist: Passenger Backrest, Sound System...
-
Member
How about hard mounting to windshield fasteners?
Am I able to hard mount these to my windshield fasteners? I have a blue ridge.
2015 Can-Am Spyder F3-S SE6
Voodoo Shorty Double-Barrel Exhaust in Black Matte Finish
Lamonster Garage Bar Clamp w/ RAM Mount and X-Grip
Lamonster Garage Spyder Decals
Wishlist: Passenger Backrest, Sound System...
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|