I made some changes just recently that others have encouraged me to post here, so I hope that you like it.

I have a 2013 RTL and last year I noticed that the rear plastic behind the wheel was getting quite oxidized, despite my use of Armour All, Lamonts Diamond product and other products, so I masked everything off and primed and painted it. It came out well and I was pleased.
20180202_114732[1].jpg20180202_114738[1].jpg
This year I noticed that the dash ring and the lower side panels were getting bad but I decided that painting them was not enough. Of course the pictures above are what they looked like after I removed all the added coatings.

I have done a little Hydrodipping recently, but the complexity of these items really were too difficult for an amateur like me, so I took them to Tommy Wilkinson at www.dipwerx.com who is only about 30 miles from me and he helped me with a solution, that I was skeptical of doing myself.

20180414_144019[1].jpg20180414_144009[1].jpg20180414_144112[1].jpg

So now you know, you can see for yourself, I consider it a homerun, your opinion may be different, but I like it.
If you are not familiar with Hydrodipping, just do a search on YouTube and you will find that the options are limitless.

Joe