USB charger ..

[HayRog]

... for center position of switch panel below handle bars.

Could any of you guys give me a recommendation of where to source the type you used yourselves -- please :-) Thanks

There's quite a few out there, just wanted to get the right one first time I order.
Just watched Pierre's video of the install -- real good video.

http://www.canamspyderaccessories.co...t-st-blue-led/ --- is the one I'm leaning towards, even though it's twice the price of some out there.

[C. Lee]

JT's Machine shop is a vendor on the home page, the link there takes you to their page and they have them there. Chris

[HayRog]

JT's Machine shop is a vendor on the home page, the link there takes you to their page and they have them there. Chris

Thanks Chris. Site says they're out of stock but I'll call them.

OK -- Talked to JT. He has no more and won't be getting more.

[eddieshep999]

Something you might need to consider


I had a double USB rocker switch on my switch panel on me 2015 RT SE5 model
Because I had fitted it on the far right hand side of the switch cluster I noticed if I plugged in a USB lead to charge up my Sens SMH10 headset whilst riding when turning the handlebars it would hit the plug in the rocket switch and would dislodge it
I found by repositioning the rocker switch into the middle position it gave enough clearance and turning the handlebars did not get anywhere near the plug

It may be worth checking your favoured position for your switch before making a final decision of where to place it

[Haze]

See the following threads. USB and voltmeter socket installed on my 2013 ST-S.
I bought this USB socket and other switches on Amazon.
Information:
www.spyderlovers.com/forums/showthread.php?106058-ST-S-Voltmeter-amp-USB-Port&highlight=switch
Source:
Red Dual USB 12V Car Boat Socket Rocker Switch Panel with Voltage Voltmeter

[pegasus1300]

... for center position of switch panel below handle bars.

Could any of you guys give me a recommendation of where to source the type you used yourselves -- please :-) Thanks

There's quite a few out there, just wanted to get the right one first time I order.
Just watched Pierre's video of the install -- real good video.

http://www.canamspyderaccessories.co...t-st-blue-led/ --- is the one I'm leaning towards, even though it's twice the price of some out there.

This the one I used. It worked very well,and was easy to install and looks good. Pierre is also very good to work with.

[HayRog]

Something you might need to consider


I had a double USB rocker switch on my switch panel on me 2015 RT SE5 model
Because I had fitted it on the far right hand side of the switch cluster I noticed if I plugged in a USB lead to charge up my Sens SMH10 headset whilst riding when turning the handlebars it would hit the plug in the rocket switch and would dislodge it
I found by repositioning the rocker switch into the middle position it gave enough clearance and turning the handlebars did not get anywhere near the plug

It may be worth checking your favoured position for your switch before making a final decision of where to place it

Noted Eddie -- already have a blank space in the center and that's where it's going.

[HayRog]

-- Went this way cause I'm cheap https://www.ebay.com/itm/401373375614

Thanks for all the suggestions guys -- this forum is the greatest

[HayRog]

See the following threads. USB and voltmeter socket installed on my 2013 ST-S.
I bought this USB socket and other switches on Amazon.
Information:
www.spyderlovers.com/forums/showthread.php?106058-ST-S-Voltmeter-amp-USB-Port&highlight=switch
Source:
Red Dual USB 12V Car Boat Socket Rocker Switch Panel with Voltage Voltmeter