-
Very Active Member
USB charger .. Rocker switch
... for center position of switch panel below handle bars.
Could any of you guys give me a recommendation of where to source the type you used yourselves -- please :-) Thanks
There's quite a few out there, just wanted to get the right one first time I order.
Just watched Pierre's video of the install -- real good video.
http://www.canamspyderaccessories.co...t-st-blue-led/ --- is the one I'm leaning towards, even though it's twice the price of some out there.
Last edited by HayRog; 03-07-2018 at 07:49 PM.
-
Active Member
JT's Machine shop is a vendor on the home page, the link there takes you to their page and they have them there. Chris
2021 RT Limited
-
Very Active Member
Originally Posted by C. Lee
JT's Machine shop is a vendor on the home page, the link there takes you to their page and they have them there. Chris
Thanks Chris. Site says they're out of stock but I'll call them.
OK -- Talked to JT. He has no more and won't be getting more.
Last edited by HayRog; 03-08-2018 at 10:59 AM.
-
Very Active Member
Something you might need to consider
I had a double USB rocker switch on my switch panel on me 2015 RT SE5 model
Because I had fitted it on the far right hand side of the switch cluster I noticed if I plugged in a USB lead to charge up my Sens SMH10 headset whilst riding when turning the handlebars it would hit the plug in the rocket switch and would dislodge it
I found by repositioning the rocker switch into the middle position it gave enough clearance and turning the handlebars did not get anywhere near the plug
It may be worth checking your favoured position for your switch before making a final decision of where to place it
Last edited by eddieshep999; 03-08-2018 at 03:53 PM.
Eddie Sheppard
Poole Dorset UK
Get a Spyder - See the World
-
Very Active Member
USB on an STS
David C
2016 F3T
DIY Garage Door Opener & GPS Mount
Battery tender cable
Rear IPS Pack Rack
-
Very Active Member
Originally Posted by HayRog
... for center position of switch panel below handle bars.
Could any of you guys give me a recommendation of where to source the type you used yourselves -- please :-) Thanks
There's quite a few out there, just wanted to get the right one first time I order.
Just watched Pierre's video of the install -- real good video.
http://www.canamspyderaccessories.co...t-st-blue-led/ --- is the one I'm leaning towards, even though it's twice the price of some out there.
This the one I used. It worked very well,and was easy to install and looks good. Pierre is also very good to work with.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
Originally Posted by eddieshep999
Something you might need to consider
I had a double USB rocker switch on my switch panel on me 2015 RT SE5 model
Because I had fitted it on the far right hand side of the switch cluster I noticed if I plugged in a USB lead to charge up my Sens SMH10 headset whilst riding when turning the handlebars it would hit the plug in the rocket switch and would dislodge it
I found by repositioning the rocker switch into the middle position it gave enough clearance and turning the handlebars did not get anywhere near the plug
It may be worth checking your favoured position for your switch before making a final decision of where to place it
Noted Eddie -- already have a blank space in the center and that's where it's going.
-
Very Active Member
-
Very Active Member
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|