RT Dash Accessory Bar.

**johnny canuck** · 02-25-2018, 01:14 PM

I hope someone can point me in the right direction. A long while back I remember seeing someone was selling a chrome or stainless bar that attaches via those two bolts on top of the RT dash. I believe it had spyder cut out in it. Can someone remember who/company that was. Been looking ---- but no luck.
Thank's in advance
Johnny.

**Bob Denman** · 02-25-2018, 01:18 PM

JThornton...

http://spyderstore.com/

**samewok** · 02-25-2018, 01:39 PM

you will like the one from JT

**Bob Denman** · 02-25-2018, 01:46 PM

To be honest: TricLED also sells one...

**nslowmotion** · 02-25-2018, 04:41 PM

Originally Posted by johnny canuck

I hope someone can point me in the right direction. A long while back I remember seeing someone was selling a chrome or stainless bar that attaches via those two bolts on top of the RT dash. I believe it had spyder cut out in it. Can someone remember who/company that was. Been looking ---- but no luck.
Thank's in advance
Johnny.

I think this is what you are looking for. This is the one I have.

http://store.valueaccessories.net/Sp...ompatible.aspx

**Lew L** · 02-25-2018, 05:22 PM

Originally Posted by johnny canuck

I hope someone can point me in the right direction. A long while back I remember seeing someone was selling a chrome or stainless bar that attaches via those two bolts on top of the RT dash. I believe it had spyder cut out in it. Can someone remember who/company that was. Been looking ---- but no luck.
Thank's in advance
Johnny.

With the sun behind you the reflection/ glare might be a bit much. The ones you can purchase above are flat black. I painted the aluminum one I made---- plane and simple----works perfect.

Lew L

**Bob Denman** · 02-25-2018, 05:48 PM

As much as I like "Shiny": I sure don't like the glare produced by reflected sunlight...

**Merlot2015** · 02-25-2018, 07:01 PM

TricLED has a very nice black powder coated (aluminum) multi mount dash bracket.

**Deanna777** · 02-25-2018, 07:04 PM

Here is a picture of the RT Dash bar that I have :

Dash bar mount 001.jpg Flat dash bar mount.

I bought the above from JT Thornton I have a 2014RTS-SE6.

Deanna

**bcer960** · 02-25-2018, 11:27 PM

I have JT's, and have not had a problem with sun glare

**imfleck** · 02-27-2018, 06:24 AM

I ordered mine last week, had it by Friday, had it installed in less than 15 minutes on Saturday. Added a Ram Mount 3" extension along with a Ram Mount X-Grip for my phone.

**Merlot2015** · 02-27-2018, 09:56 AM

Originally Posted by imfleck

I ordered mine last week, had it by Friday, had it installed in less than 15 minutes on Saturday. Added a Ram Mount 3" extension along with a Ram Mount X-Grip for my phone.

Pictures please!

**tjsox** · 02-27-2018, 10:16 AM

Spyderchrome also sells one, they are in Quebec. Less cost with exchange, shipping and fees.

https://www.spyderchrome.net

**DGoebel** · 02-27-2018, 10:20 AM

TricLED's Dashbar with ram mounts,
installed.jpg
(Though the bar is hard to see.)

**imfleck** · 02-28-2018, 06:19 AM

20180228_061417.jpg

**Bob Denman** · 02-28-2018, 07:52 AM

**yellow dog** · 03-03-2018, 06:28 PM

I bought one of these and installed it on my 2015 RT-S. Easy to install and love the way it looks. I have one problem that I figure can be solved. My ram arms will not tighten enough on the slick ram balls that came with the dash mount. As I drive the arm continues to slip until my GPS is bouncing on my dash. Anyone else experience this?

**Bob Denman** · 03-03-2018, 06:40 PM

Take a pair of Vise Grips, and wrap the teeth in a piece of denim...
You'll be able to grab the knob, and give it a serious twist with that setup!

I've lost ALL strength in my hands, and this trick works for me...

**bcer960** · 03-03-2018, 07:20 PM

Originally Posted by Bob Denman

Take a pair of Vise Grips, and wrap the teeth in a piece of denim...
You'll be able to grab the knob, and give it a serious twist with that setup!

I've lost ALL strength in my hands, and this trick works for me...

Make sure the balls don't have aluminium threads. I twisted 2 right off doing this.

**Spyder 42** · 03-04-2018, 07:44 AM

JT’s dash mount here.
I had attempted to use just Ram mounts to get my Zumo 550 up and over the dash but the long arm was an inch too short. JT’s Dash Mount adds a spacer that moved the Ram ball up enough that the Zumo plate misses the dash. Perfect.

**HayRog** · 03-04-2018, 12:25 PM

Made mine from some aluminum plate I had as leftover. Painted it with black Plasti Dip.
If I had to buy, it would have been JT's

**Fire34** · 03-10-2018, 05:19 AM

I am just wondering how everyone routes there phone charger cables etc. up to this dash mount. I have yet to take the plastic off for my first oil change. I was originally thinking of mounting my x grip on the hand grip but like this idea a lot better Thanks guys

Dave

**bcer960** · 03-10-2018, 10:06 AM

Originally Posted by Fire34

I am just wondering how everyone routes there phone charger cables etc. up to this dash mount. I have yet to take the plastic off for my first oil change. I was originally thinking of mounting my x grip on the hand grip but like this idea a lot better Thanks guys

Dave

I ran the power cord for my GPS up through the swing arm slot for the windscreen. It has been there for 2 years, and no issues.

**Fire34** · 03-11-2018, 04:37 AM

That was what I was thinking but was afraid of the raising and lowering of the windscreen would hurt them Thanks again
Dave

Originally Posted by bcer960

I ran the power cord for my GPS up through the swing arm slot for the windscreen. It has been there for 2 years, and no issues.

Thread: RT Dash Accessory Bar.

Thread Tools

Display

RT Dash Accessory Bar.

Dash mount

I ordered from TRICLED

Here's how I've mounted mine

dash mount

Power ?

Thanks

Posting Permissions