Results 1 to 2 of 2
  1. #1
    SpyderLovers Sponsor F4 Customs's Avatar
    Join Date
    Nov 2012
    Location
    Twinsburg, Ohio
    Posts
    697
    Spyder Garage
    0

    Default Can-Am Spyder Windshield F3-Touring 25" Tint, Vented Spyder Windshield

    "Give yourself a great ride on a great machine with the F4 Customs F3 Touring Tint Windshield". The shield mounts with your existing hardware. Gain extra performance over your stock shield with this 25" vented windshield. Shield height is based on the rider preference.

    Call us 330 968 4644 or visit us @ f4cutoms.com

    F3-25TV CUSTOMER PIC.jpg


    Can-Am Spyder Windshield F3-Touring 25" Tint, Vented Spyder Windshield
    "Give yourself a great ride on a great machine with the F4 Customs F3 Touring Tint Windshield". The shield mounts with your existing hardware. Gain extra performance over your stock shield with this 25" vented windshield. Shield height is based on the rider preference. With this shield a rider that is 6' tall will look through the shield. This shield is great for pushing the wind up and over both you and the co rider. In the rain you will really enjoy the built in Rain Shedding capability. (picture show is the 25" clear with the Vent.







    • 25" from the bottom to the top of the windshield
    • Mounts with existing factory hardware
    • Vent included
    • Tint
    • Thickness: .177"
    • Improved angle
    • DOT approved
    • Fits all F3 Touring models.
    • MADE IN THE USA
    F4 Customs, Inc.
    "The Motorcycle Windshield Folks"
    941-347-7496
    sales@f4customs.com
    <a href='http://www.spyderlovers.com/adserver/www/delivery/ck.php?zoneid=22' target='_blank'><img src='http://www.spyderlovers.com/adserver/www/delivery/avw.php?zoneid=22&cb=567846784' border='0' alt='' /></a>

  2. #2
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,143
    Spyder Garage
    2

    Default

    If you want protection but still want to get some air, this will give it to you, even at 6’7”. The 25” sits level with the bottom of my nose.....and have I mentioned that you can clean it with water and a paper towel at gas station stops?

    Pete
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •