-
sweet mod..
I like it.. maybe a mod I could do..
-
RT-S PE#0174
Wow, amazing what people can do
-
Registered Users
very nice
nice brainstorming, looks sweet!! Have you found a mod yet to make the fuel any cheaper? lol!! Have a blast, put 'er in the wind!!
-
Very Active Member
When it is full does it go up the whole neck of the mod or does it only fill to the stock set-up?
-
I have to keep the Spyder on to watch the gauge so it doesnt fill up to the new cap...that wouldn't be good because the venting is still the original and all of that gas would overfill the charcoal canister and possibly start a fire...
I just did this mod..so I'll write it up with pics....although I'm not too happy with the ABS plastic under the tupperware, I'm going to source it out to get the filler neck made in aluminum or somekind of metal.
Last edited by Wheelz; 07-15-2009 at 10:31 PM.
Reason: corrections
-
Member
I fill the tank as I normally would. I fill it to the last full bar on the gas gauge making sure that I do not overfill. I have about 3000km with this mod and the ABS is working fine.
-
Very Active Member
I thought I put this up on this section, must of screwed up, I just hit 11,000 miles today on this setup, works great cost on this upgrade?? 0.0 dollars just use a sidegrinder to cut the plastic in a straight line and boom! done and done.
-
Active Member
"Limitations only exist in the mind..."
-
Left leg limitations
Pilo, If you don't have an artificial replacment for the left leg you might want to search out the gas cap extension that was done by another amp, that goes thru the seat and is filled without rasing the seat. I had the same problem, but with the artifical leg I get off/on the right side and walk around and do the fill up. Good luck. Mickc
-
Active Member
AKA or BKA...?
Originally Posted by mickc
Pilo, If you don't have an artificial replacment for the left leg you might want to search out the gas cap extension that was done by another amp, that goes thru the seat and is filled without rasing the seat. I had the same problem, but with the artifical leg I get off/on the right side and walk around and do the fill up. Good luck. Mickc
Mickc:
I am an AKA (above the knee amputee), and when I am on the SE5 (probably because of the forward seating position), the edge of the socket of my old artificial leg feels uncomfortable on my left buttock and upper hip, so I ride it without the artificial leg.
When I get a new and better prosthesis I'll try it on the Spyder and then I'll decide which way to go.
If you mean the other amp mod where you lift the left-front corner of the seat..., to be honest, I like Jumper's arrangement better...
Are you an AKA or BKA? What sort of prosthesis do you use?
PM me, or e-mail me to: pilodiaz@net-uno.net
Saludos from an Argentinean in Venezuela and welcome
"Limitations only exist in the mind..."
-
Very Active Member
Originally Posted by Jumper35
Hey Wheelz, here is a pic of the fuel routing.
its a perfect job !! have you any idea how much fuel fits inside the tank now ??
chris
Outlander fairing - Fox-shock - BajaRon Swaybar - Hankook tire/ back - 165/50 Imperial tires front & longer front shocks - GIVI Topase - Shad sidecases -heated grips - new seats
-
Jumper35 handbrake
Like to ask what handbrake mod did you do the one that push the foot brake or the one that there is no foot brake any more
-
-
Very Active Member
-
-
Registered Users
2011 Can Am Spyder RT-S Pure Magnesium Metallic, with SM5 transmission, Two Brothers muffler, cup holder ,clam shell ISO grips,I pod nano and chrome handlebars. Utopia backrest,chrome foot pegs, chrome passenger floor boards,chrome shifter and brake pedal,chrome windshield bracket and chrome kewlmetal highway pegs
Harleyrick
-
pics
Anyone know how I access the pics of the Gas cap relocation that were originally part of this thread? By Jumper35
Thanks
roller
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|