swapping 2015 spyder RS-S handlebars onto 2009 GS SM5

[09gs]

ever wonder how its gonna look fit well i can share my some of my work process as i went all the way and performed a swap to my 2009 GS sm5 dont get fooled by fenders its a 2009 gs, as i swapped them as well from 2016 spyder F3

IMG_20180205_120738.jpg

[Warlock]

ever wonder how its gonna look fit well i can share my some of my work process as i went all the way and performed a swap to my 2009 GS sm5 dont get fooled by fenders its a 2009 gs, as i swapped them as well from 2016 spyder F3

IMG_20180205_120738.jpg

Wouldn't mind some info on the swap out. I had thought about putting RT handle bars on mine.
David

[09gs]

sure i had pictured process as much as i could from start to finish SE5 actually would be easier but i had SM5, anyway will post a bit later once back from a garage

[Warlock]

sure i had pictured process as much as i could from start to finish SE5 actually would be easier but i had SM5, anyway will post a bit later once back from a garage

I had made a attempt once with the RT bars but my clutch reservoir wouldn't work with the RT bars with major mods or either but the RT clutch reservoir to make it work. I also have the a 08 SM5
David

[09gs]

ok yes you need a 2013 and up clutch as it has a spacer leg longer to clear the thicker aluminum casting any ways here is how i started
1.jpg

2.jpg3.jpg4.jpg5.jpg

[09gs]

thats a finished adapter welded and cleaned not powder coated yet
11.jpg111.jpg