-
TricLED bumpskid LED kit; where to find harness connector?
The connection wire on this is only 24", which isn't long enough to bring it up to the harness connector for the running light at the headlight. Before I cut off the harness adapter and just use splice connectors, does anyone know where there might be a 12v line (switched) with a 2-prong harness plug close enough to the bump skid I could use it as intended? Thanks.
bumpskid LED wire.jpg
2014 RTL Platinum
-
Very Active Member
Pete, Can it be that TricLED screwed up that badly, or am I missing something essential? Have you contacted them to discuss your problem?
-
Originally Posted by Arion
Pete, Can it be that TricLED screwed up that badly, or am I missing something essential? Have you contacted them to discuss your problem?
I'm waiting for a call-back.
2014 RTL Platinum
-
Originally Posted by UtahPete
The connection wire on this is only 24", which isn't long enough to bring it up to the harness connector for the running light at the headlight. Before I cut off the harness adapter and just use splice connectors, does anyone know where there might be a 12v line (switched) with a 2-prong harness plug close enough to the bump skid I could use it as intended? Thanks.
bumpskid LED wire.jpg
That harness is ment to plug into the connector on the a arm that feeds your fender lights.
Easy peasy it's a switched circuit.
Hope that helps you, Gary
-
Originally Posted by gdjbear
That harness is ment to plug into the connector on the a arm that feeds your fender lights. Easy peasy it's a switched circuit. Hope that helps you, Gary
Hi Gary, yes it does. Now I just have to find that connector. Probably in toward the engine?
2014 RTL Platinum
-
Under the A Arm about 6 inches from the fender on the bottom of the plastic covers for the A ARM
That's where you will find those connectors
MAy have to cut a wire tie or two to get at the connector easier
-
Originally Posted by trikermutha
Under the A Arm about 6 inches from the fender on the bottom of the plastic covers for the A ARM That's where you will find those connectors. MAy have to cut a wire tie or two to get at the connector easier
Thanks. That's great info. I'm surprised TricLED didn't mention that in their D-I-Y instructions.
2014 RTL Platinum
-
Originally Posted by UtahPete
Thanks. That's great info. I'm surprised TricLED didn't mention that in their D-I-Y instructions.
That's how I hooked up my fender lights too
Easy peesie too plug and play
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|