Results 1 to 10 of 10
  1. #1
    Very Active Member ofdave's Avatar
    Join Date
    Jul 2017
    Location
    sarasota, fl
    Posts
    877
    Spyder Garage
    0

    Default trunk release when key doesn't work?

    Has not happened to me but I was wondering if there is an emergency trunk release on the F3?
    or how to open if the key did not work?
    Last edited by ofdave; 12-17-2017 at 04:07 AM.



    2017 F3, SM6-basic black, plain and simple

  2. #2
    Very Active Member ofdave's Avatar
    Join Date
    Jul 2017
    Location
    sarasota, fl
    Posts
    877
    Spyder Garage
    0

    Default

    can't believe over 120 have looked at this and not one has a clue?



    2017 F3, SM6-basic black, plain and simple

  3. #3
    Active Member 007james's Avatar
    Join Date
    Nov 2015
    Location
    Roanoke, Virginia
    Posts
    210
    Spyder Garage
    1

    Default

    Quote Originally Posted by ofdave View Post
    can't believe over 120 have looked at this and not one has a clue?
    I found on my RT that pushing down on the Fronk Hood right in the center over the latch, BEFORE turning the Key unlocks it. Hold the Hood down, turn the Key to the left, and it should unlock. Also, I sprayed some WD40 on the spring and latch. Before I held the Hood down, the Key would not open the latch. Not sure if the F3 has the same set up as my 2016 RT. Tho.

    Jim
    2016 RT Limited , Black & Lava Bronze

  4. #4
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,163
    Spyder Garage
    2

    Default

    Quote Originally Posted by ofdave View Post
    can't believe over 120 have looked at this and not one has a clue?
    Dave, they may not have answered as there are many threads already posted on this issue that are fairly easy to find through a quick search.

    Pete
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  5. #5
    Very Active Member Rattlebars's Avatar
    Join Date
    Mar 2017
    Location
    Girard OH (summer) Greenville SC (winter)
    Posts
    877
    Spyder Garage
    1

    Default

    >CLICK ME<

    Not the F3 but should apply to all latches.
    to see my 2016 F3-T and many how to's
    2016 F3-T SE6 Roadster , Extended brake pedal for which I drilled out the brake rod yolk to lower it and added spacers to lift it slightly Black/Grey

  6. #6
    Very Active Member ofdave's Avatar
    Join Date
    Jul 2017
    Location
    sarasota, fl
    Posts
    877
    Spyder Garage
    0

    Default

    thanks
    the latch in the video is quite different from the F3 which uses a vertical pin. I suspect the release method is similar.
    I was really looking to find if there was a way to unlatch the latch pin if the electric release using the key did not work. Or if you needed trunk access and had no key.
    Was hoping to hear there was a cable hidden somewhere that would release the latch.
    There is that feature on some cars and I was hoping to find similar.
    So now I can hope it never happens to me



    2017 F3, SM6-basic black, plain and simple

  7. #7
    Active Member
    Join Date
    Jun 2017
    Location
    "Granite State"
    Posts
    116
    Spyder Garage
    0

    Default

    Had that problem when my F3s (D-500 SE) was new. "Factory stuck @ delivery" & didn't realize it until home. Thought something was wrong but eventually it released after numerous attempts. I do recall applying light pressure over the latch area numerous times before it opened. (But not while working the key/ignition.)

    Decided I wouldn't be putting anything in the "frunk" that I might want/need for my ride home. (like helmet) Also made me think about the consequences of buying something & having to return it just because I couldn't get it home lol.
    Last edited by TRLBLZR1; 12-17-2017 at 05:45 PM.
    🏁🏁 "Live Free Or Die" 🏁🏁

  8. #8
    Very Active Member ofdave's Avatar
    Join Date
    Jul 2017
    Location
    sarasota, fl
    Posts
    877
    Spyder Garage
    0

    Default

    got my answer in a private message
    hook a wire to the latch release, run it out the left side and zip tie in place above the top of the shock, out of sight and out of the way-it'll be there if/when I need it
    will be doing it later this week



    2017 F3, SM6-basic black, plain and simple

  9. #9
    Active Member Dray's Avatar
    Join Date
    Dec 2014
    Location
    Graham Tx
    Posts
    349
    Spyder Garage
    0

    Default trunk release

    I did the same on my F3L trunk and the passenger seat as it would not release all the time.

    Dray

  10. #10
    Very Active Member ofdave's Avatar
    Join Date
    Jul 2017
    Location
    sarasota, fl
    Posts
    877
    Spyder Garage
    0

    Default

    Quote Originally Posted by Dray View Post
    I did the same on my F3L trunk and the passenger seat as it would not release all the time.

    Dray

    good idea!
    I'll do that also



    2017 F3, SM6-basic black, plain and simple

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •