-
Caliper Bolts
Does any one know what the bolts are for the brake calipers front and rear that are to be replace each time removed. All I Get on the parts break down is front M10 X 65 rear M12 X 30. I am sure if I had the grade and size I could purchase then local.
2021 RT Limited
Asphalt Grey
Lamonster RT phone mount
Sena SMH-10
Lamonster Belt Tensioner w/ larger roller
Spyderpops Missing Belt Guard
Garmin's GPS
-
Very Active Member
Originally Posted by gerald37
Does any one know what the bolts are for the brake calipers front and rear that are to be replace each time removed. All I Get on the parts break down is front M10 X 65 rear M12 X 30. I am sure if I had the grade and size I could purchase then local.
I reuse ours, just use some blue Loctite on them.
2007 M109R LE - To many MODS to list. Its cheaper that way!!!
-
Very Active Member
Originally Posted by M109Dreamer
I reuse ours, just use some blue Loctite on them.
Clean up the threads with a wire brush and your good to go.
As M109Dreamer stated, make sure you use some blue loctite when putting them back in.
-
I know I always did that on my Goldwing's and never had any problem. The torque is not that high so the threads should not be pulled any. Thanks for the advice.
2021 RT Limited
Asphalt Grey
Lamonster RT phone mount
Sena SMH-10
Lamonster Belt Tensioner w/ larger roller
Spyderpops Missing Belt Guard
Garmin's GPS
-
Very Active Member
Little checking
You have to get the grade off the old bolt but here is a chart on the torque
torque.jpg
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
Originally Posted by Chupaca
You have to get the grade off the old bolt but here is a chart on the torque
torque.jpg
Do you by chance have that pic in pdf? Would like to download it and keep it on my phone when Im out in the garage.
2007 M109R LE - To many MODS to list. Its cheaper that way!!!
-
Very Active Member
Originally Posted by M109Dreamer
Do you by chance have that pic in pdf? Would like to download it and keep it on my phone when Im out in the garage.
just save it as a jpeg; then e-mail it or save with a USB connection to to your phone.
-
Very Active Member
Originally Posted by cruisinTX
just save it as a jpeg; then e-mail it or save with a USB connection to to your phone.
That worked, thx
2007 M109R LE - To many MODS to list. Its cheaper that way!!!
-
Very Active Member
bolts
I would go with grade 8 if you don't want to buy from a dealer.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|