Results 1 to 5 of 5
  1. 10-29-2017, 12:55 PM #1
    eddieshep999
    eddieshep999 is offline
    Very Active Member eddieshep999's Avatar
    Join Date
    Oct 2010
    Location
    Broadstone,Poole, Dorset, UK
    Posts
    1,211
    Spyder Garage
    0

    Default Poor licence plate lighting - My mod

    Came across a couple of Chrome numberplate screw LED’s
    that I had purchased sometime ago so I decided to fit them to my RT
    Having fitted them I noticed just how poor the numberplate light is fitted as standard by BRP I took it out and noticed it was rusting on one of the connections
    Rather than just replacing it I decided to make my own
    again I found some small White LED’s similar to ones I had fitted to make my indicators easier to see
    I made my own plate and it is a lot brighter see photos

    D3B1D03E-5EE0-478E-8096-F7D2C3F482D8.jpg1511FADB-345F-40E1-91DD-A0A5EDD2CEE8.jpegAE22F2F1-A53E-4C59-BE62-83F81C32E039.jpg4E47E003-7F24-48DB-9622-80EED781B1FE.jpg
    Attached Images Attached Images
    Eddie Sheppard
    Poole Dorset UK

    Get a Spyder - See the World

    Reply With Quote Reply With Quote
  2. 10-29-2017, 12:59 PM #2
    Dmetcalf
    Dmetcalf is offline
    Active Member Dmetcalf's Avatar
    Join Date
    Jun 2017
    Location
    Texas
    Posts
    451
    Spyder Garage
    0

    Default Nice job ..!

    You made good use of them ..! Well done ..!
    2016 RT-Ltd
    Bajaron swaybar
    Spyderpops trunk light
    Elka stage 2 front shocks
    Extra longbrake pedal
    brake modulator
    Centramatic wheel balancers on the front and rear.
    Rivco dual flag holder
    Tricled mirror turn signal indicators
    with American and Texas flags
    Lamonster Magic Mirrors
    missing belt guard
    Lambskin seat cover from Smokey mountain sheepskin.com
    Tricled 360 degree led Headlights
    Lamonster led fog lights
    Baker air wings
    2019 Silverado Duramax dually
    2019 Cyclone 4007 toyhauler
    Spyderpops bumpskid w led light
    Rivco brand footrest
    spydermanexhaust.com exhaust
    had my exhaust installed @ Spyder in the hills.
    Reply With Quote Reply With Quote
  3. 10-29-2017, 01:18 PM #3
    Chupaca
    Chupaca is offline
    Very Active Member Chupaca's Avatar
    Join Date
    Oct 2012
    Location
    San Diego, CA.
    Posts
    31,097
    Spyder Garage
    1

    Default Nicely done....

    Great job and clean and tidy... makes a difference...
    Gene and Ilana De Laney
    Mt. Helix, California

    ​2012 RS sm5
    2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
    Reply With Quote Reply With Quote
  4. 10-29-2017, 01:20 PM #4
    Bob Denman
    Bob Denman is offline
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default



    Gunny 01.jpg
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black
    Reply With Quote Reply With Quote
  5. 10-29-2017, 01:33 PM #5
    ARtraveler
    ARtraveler is offline
    Very Active Member ARtraveler's Avatar
    Join Date
    Feb 2010
    Location
    Valley Springs, AR
    Posts
    41,342
    Spyder Garage
    8

    Default

    Very nice.

    Some other possibilities for those shopping:

    Corbin had an license plate frame that I put on my 08. That also had better lighting than the OEM.

    On my new Vulcan, I put an LED frame on--LEDS for everything including turn signals. Got that one from RevZilla.
    Last edited by ARtraveler; 10-29-2017 at 03:26 PM.

    Currently Owned: 2019 F3 Limited, 2020 F3 Limited: SOLD BOTH LIMITEDS in October of 2023.

    Previously : 2008 GS-SM5 (silver), 2009 RS-SE5 (red), 2010 RT-S Premier Editon #474 (black) 2011 RT A&C SE5 (magnesium) 2014 RTS-SE6 (yellow)

    MY FINAL TALLY: 7 Spyders, 15 years, 205,500 miles

    IT HAS BEEN A LONG, WONDERFUL, AND FUN RIDE.
    2020 F3L , Magma Red
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules