-
Active Member
Replace pins and circlips screen support 2011 RT Ltd for 2012 model
I've read in this forum that I could replace the pins and circlips of the screen supports of my 2011 RT for those of the model of 2012.
Does anyone know the references?
I've found these but I'm not sure.
22 - 1 x 705005974 Retainer Pin (Long)
23 - 2 x 705005973 Retainer Pin (Shorts)
24 - 6 x 250000565 Hexalob Screw M4x10
Do you know why the retainer pins 705005973 are five times more expensive than the long one?
Thank you very much.
Last edited by mcalva; 10-13-2017 at 07:35 AM.
-
Very Active Member
Curious
Why ... ?? but regardless, if you go to cheapcycleparts.com you can get all you need OEM cheaper and they will have them in stock to change them. Have no clue why the cost difference....
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
Originally Posted by mcalva
I've read in this forum that I could replace the pins and circlips of the screen supports of my 2011 RT for those of the model of 2012.
Does anyone know the references?
I've found these but I'm not sure.
22 - 1 x 705005974 Retainer Pin (Long)
23 - 2 x 705005973 Retainer Pin (Shorts)
24 - 6 x 250000565 Hexalob Screw M4x10
Do you know why the retainer pins 705005973 are five times more expensive than the long one?
Thank you very much.
Not even sure what screen you are asking about.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Active Member
Oppps! I'm sorry maybe I didn't explain very well.
Weeks ago I had lateral movements on the windshield and I tryed to add some plastic washers to the circlips. At first it seemed fine but
at the end the central arm of the windshield has broken and I will change it. I think it has broken, in addition to the dubious quality of
the original central arm, by the lateral movement of the screen and I read here in the forum that the pins and circlips of the 2011 model
have been changed for retainer pins with screws to prevent that movement in the 2012 model and are compatible, so I decided to change
too.
Then, looking for prices to ask for the parts I wonder that the short retainers are a lot of times more expensives than the long one.
9 $ and 34$ each one!!!
Maybe is too much money and I'll have to wait but in the other side I wont change the entire windshield assembly.
The new central arm is from noboot. Do you think it will be needed to change these parts?
Probably I could try first with the new central arm and if It continues with lateral play go for them.
Thank you for your answers.
Last edited by mcalva; 10-13-2017 at 01:42 PM.
-
Active Member
Do you know a friend that has a lathe. You should be able to trim the length of the pins down and have them drilled and tapped. You should be able to find screws at a hardware store.
-
Sorry to say if you feel that 34 cents is too much. How much you think the windshield you are protecting?
2012 Spyder RT SE5 Brake pedal mod
-
Sorry about the price, but even for $34 it may be worth it.
2012 Spyder RT SE5 Brake pedal mod
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|