-
Help!!
I have a 2010 Spyder RSS SE5 and i noticed the "BRAKE FAILURE" scrolls across screen when I was riding the other day. Brakes seem to be working fine. I need to know how to get the error codes and how to reset. Thank You in advance for your help.
-
Very Active Member
check your brake fluid level and your rear brake pads. Spyder is very sensitive to a very slightly lower fluid levels. The Rear pads wear faster then the fronts for some reason.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
Things to check....
First off get the spydercodes app...it's free and will tell you how to get the codes, what they mean and some solutions.
Check you were not ryding with your foot on the brake....
Check the brake fluid level....
Check the brake light switch..they will stick...
Check that all the brake lights are working
Check the brake pads...
Check the brake fluid sensors (if you can)
Turn the spyder off remove the key let the computers reset, maybe 30-45 minutes depending on model, re start and see if the warning cleared and does not come back. Could be a glitch or too long on the brakes on a downhill....
Last edited by Chupaca; 10-02-2017 at 05:19 PM.
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
Download the spyderCodes app. If you have a smart phone. Here are codes: https://lookaside.fbsbx.com/file/err...Z1AjqUtGtVaPSA
Last edited by Highwayman2013; 10-01-2017 at 12:06 PM.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Very Active Member
To get codes: Press and hold MODE button
Stop on TOTAL HOURS
Push the FLASH HIGH BEAM rapidly 5 times.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
I have checked the fluids and they are full. brake pads are still beefy as there is only 7,100 miles on the machine. I can not find the app you spoke of in the apple app store. I tried the procedure of the headlight flashing switch when in total hours on the gauge and I do not get any codes just the regular scrolling Brake Failure message. What next??
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|