Removal of Bumpskid for Funk removal

[eddieshep999]

I want to remove the Funk on my RT 2015 SE6 model which has the Spyderpops Non- LED Bumpskid fitted

Do I have to remove the Bumpskid to get access to the bottom bolts holding the Funk
or can I just remove the rear bolts (Show in the photo as No's 1 - 6)
Leaving the 7 front ones keeping the Bumpskid attached

Photo of Spyderpops Bumpskid showing the attachment bolts:-

5211F86C-E88E-4946-9082-B6A23595B1C4-13941-00001828DAD8457C.jpg

[Doc - Riverside]

You only have to remove bolts 5 and 6 as they go into the frame of the bike. The others go into the frunk bottom.

[stjoeguy]

You may not need this, but it was helpful to me. The instructions include how to remove the frunk.

http://instructions.brp.com/content/...mber=219400137

[eddieshep999]

You may not need this, but it was helpful to me. The instructions include how to remove the frunk.

http://instructions.brp.com/content/...mber=219400137

Tried link but it came up with :-

No resource found

Cannot serve request to /content/instruction-sheet/en_CA/geohome.mber=219400137 on this server

---

But thanks for trying to help

[stjoeguy]

Try this one and pick the fog light install for RT.

http://instructions.brp.com/content/...&val=fog light