-
Making the accessories fit together - Corbin interferes with BRP rear rack
I found a great deal on a new BRP rear rack, which provided a platform on which to attach a Givi plate for holding a top box
Then, I found a great deal on a used (two-piece) Corbin saddle. Unfortunately, I found interference between these two accessories. The back edge of the passenger saddle hit the front edge of the rear rack, putting way too much back-to-front pitch for m'lady to rest easy on pillion. Knowing what it feels like to me if a saddle is slanted toward the gas tank on a motorcycle, I sure didn't want to put my riding buddy through that kind of torture. Sort of like the condition hikers get from a long downhill descent called "downhill toejam," if you get my drift.
The only way to get the rear of the seat on an even keel (i.e. low enough at the back) was to grind awaya serious amount of the rear rack's front edge to allow the seat to clear. It started out pretty darn ugly:
IMG_3432.jpg
As I continued to grind, the edge got better:
IMG_3433.jpg
Finally, the saddle would drop down, clearing the rack's front edge, and cover up 98% of the ugliness.
IMG_3434.jpg
Unless it's pouring down rain in the morning, we get to go for a spin and see if this solved the issue. If not, she's gonna have to get her own!
Pete
Pete Tamblyn
Cleveland, GA
2020 F3 Limited (black)
Time Out XL1800 cargo trailer
2019 Royal Enfield 650 Interceptor
2018 Kawasaki Versys-X 300
2013 ST (sold)
2015 F3-S SOLD
2014 RT-Limited (cognac) SOLD
-
Very Active Member
-
where there is a will.....
Originally Posted by akspyderman
...and the presence of pneumatic abrasive tools!
Give a kid a hammer and sooner or later, he'll find something to break.
Did I mention I had to un-rivet the seat cover and grind away parts of the seat base? Once I got the back edge to clear, I discovered it was then hitting the arm rest support bars. Arrrrrgh!
Last edited by motoswami; 09-06-2017 at 10:13 PM.
Pete Tamblyn
Cleveland, GA
2020 F3 Limited (black)
Time Out XL1800 cargo trailer
2019 Royal Enfield 650 Interceptor
2018 Kawasaki Versys-X 300
2013 ST (sold)
2015 F3-S SOLD
2014 RT-Limited (cognac) SOLD
-
Success
Picture says it all! The seat finally fits, both with the other accessories, and -- most important -- the lady!
On to the next farkle: TricLED fender lights.Jackie says the seat adjustment is perfect.jpg
Pete Tamblyn
Cleveland, GA
2020 F3 Limited (black)
Time Out XL1800 cargo trailer
2019 Royal Enfield 650 Interceptor
2018 Kawasaki Versys-X 300
2013 ST (sold)
2015 F3-S SOLD
2014 RT-Limited (cognac) SOLD
Forum
ST Shop Talk
Making the accessories fit together - Corbin interferes with BRP rear rack
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|