Results 1 to 5 of 5
  1. #1
    Active Member
    Join Date
    Aug 2015
    Location
    Cleveland, GA
    Posts
    341
    Spyder Garage
    0

    Default layout of switches on dash

    I have a plain vanilla 2013 ST.

    Can someone with a farther-up-the-foodchain (e.g. ST-Limited) model tell me what the four functions are of the rectangular switches by the base of the handlebars?

    I know the one on the left-most position is for the Park Brake.

    The other three....?

    Am I right in assuming that if I order the BRP OEM "Foglight" switch, I can hook it up to the connector behind it, and then the plugs at the opposite end of the wiring harness (at the fog light location) will be live?

    TIA

    Pete
    Pete Tamblyn
    Cleveland, GA

    2020 F3 Limited (black)

    Time Out XL1800 cargo trailer

    2019 Royal Enfield 650 Interceptor
    2018 Kawasaki Versys-X 300

    2013 ST (sold)
    2015 F3-S SOLD
    2014 RT-Limited (cognac) SOLD

  2. #2
    Very Active Member Bfromla's Avatar
    Join Date
    Aug 2014
    Location
    Bossier LoUiSiAna
    Posts
    5,978
    Spyder Garage
    1

    Default Ok here you go

    I can only list what I have so far
    Left->Right
    P/brake. Heated grips. Empty space (no switch). Blank filler with wires (no idea what for) . Fog lights prewired


    the fog light kit #219400348 that I got from Pitbulls @ spyderfest had the rocker switch with it. & some pitiful instructions. (I like details) anyway fyi you will need help from someone with kid sized hands to reach upper bolts on either side. PITA also the lights have a housing & a body panel piece make sure the body piece is as far back as you can get it or you will have a ugly lil gap. There is a youtube of install, the guy removes upper part of shock That is one way but it can be done without all that. Also good time to add Tricrings from TricLed (Fyi they only mount to the fog lights the stock plastic is not round) FYI mine tapped into fender driving lights, but only way camera would see ring was with brights headlight on.
    Attached Images Attached Images
    Last edited by Bfromla; 09-02-2017 at 05:20 PM. Reason: Brights

    2013 STL SE5 BLACK CURRANT
    SpyderPop's: LED bumpskid
    SmoothSpyder: dualmode back rest
    T r * * LED:foam grip covers, Tricrings, FenderZ,
    brake light strips, wide vue mirrors
    Rivico SOMA modulation brake leds
    sawblade mowhalk fender accents
    minispyder dash toy
    Lid lox
    KradelLock
    Pakitrack
    GENSSI ELITE LED H4 headlights
    FLO (Frunk Lid Organizer)
    BRP fog lights, trailer hitch
    SENA 20S EVO
    2013 STL , Stock Stock Black currant

  3. #3
    Very Active Member Haze's Avatar
    Join Date
    Oct 2015
    Location
    Lynden, WA
    Posts
    1,211
    Spyder Garage
    0

    Default ST switches.

    The wiring harness is common to several models of Spyder.
    The switches are from the left to right.
    Parking Brake - Heated Grips - Compressor for the rear shock on the RT - Fog Lights.
    On my ST I installed switches purchased on Ebay/Amazon for my DIY heated grip and DIY fog lights.
    Although not shown the switches have red pilot lights that compliment the stock switched.
    The switches plug into the standard harness connectors. You can plug your fog lights and grip heaters
    into the standard sockets. That way the accessories use the bikes original power and fuses.
    I bypassed the compressor switch and installed a rocker switch for my garage door opener.

    http://www.spyderlovers.com/forums/a...3&d=1499305947

    Also cut a square hole in the center of the switch panel and installed a dual USB port with a voltmeter.

    More info on switches and farkles. Start at post #5.
    http://www.spyderlovers.com/forums/s...30#post1214330
    Last edited by Haze; 09-02-2017 at 10:44 PM.
    David C
    2016 F3T
    DIY Garage Door Opener & GPS Mount
    Battery tender cable
    Rear IPS Pack Rack



  4. #4
    Active Member
    Join Date
    Aug 2015
    Location
    Cleveland, GA
    Posts
    341
    Spyder Garage
    0

    Default plug-and-play?

    My comments/questions inserted in blue type

    Quote Originally Posted by Haze View Post
    The wiring harness is common to several models of Spyder.
    The switches are from the left to right.
    Parking Brake - Heated Grips - Compressor for the rear shock on the RT - Fog Lights.

    Thanks so much for that info.

    On my ST I installed switches purchased on Ebay/Amazon for my DIY heated grip and DIY fog lights. The switches plug into the standard harness connectors. You can plug your fog lights and grip heaters
    into the standard sockets. That way the accessories use the bikes original power and fuses.

    This switch?
    http://www.ebay.com/itm/Waterproof-M...item4b0d2998fc

    The backside of THAT switch seems only to have three spade connectors, which don't appear to match the CanAM wiring harness connectors.

    I would love to find the oem switches; then I would only have to get the correct plug-in connectors at the fog light location on the bike

    Pete.


    More info on switches and farkles. Start at post #5.
    http://www.spyderlovers.com/forums/s...30#post1214330
    Pete Tamblyn
    Cleveland, GA

    2020 F3 Limited (black)

    Time Out XL1800 cargo trailer

    2019 Royal Enfield 650 Interceptor
    2018 Kawasaki Versys-X 300

    2013 ST (sold)
    2015 F3-S SOLD
    2014 RT-Limited (cognac) SOLD

  5. #5
    Very Active Member Haze's Avatar
    Join Date
    Oct 2015
    Location
    Lynden, WA
    Posts
    1,211
    Spyder Garage
    0

    Default switches

    Seems strange but the Ebay switches work. Saved a bit of money too.

    Use the part numbers below for the 2 OEM switches and order from you local dealer.
    OEM Grip Heater switch 710002354
    OEM Fog Light switch 710002351

    The OEM switches are available from Power Sports Warehouse and all major Sypder parts suppliers
    Be careful with PSW. They are inexpensive but not the best in customer service.

    Connectors are available on EBay/Amazon - Thanks to JimVonBaden for the details
    Superseal Connectors
    These should give you the info you need to figure out what you're working with and how to manipulate it all.
    https://www.google.com/url?sa=t&rct=...5Rn86SNwITOXmg

    https://www.google.com/url?sa=t&rct=...kqeUo1lH_BQAPg

    About halfway through this video.
    https://youtu.be/adSl73Qjwok

    Driving Light Connector The wiring is set up so you can turn the lights on with the switch, or, swap wires, and they come on with the low beams and shut off with the high beams. For the switch you want gray with the green stripe and black.

    driving light.jpg

    Heated grip connector - Sorry I don't have a source for this connector
    grip connector.jpg




    Last edited by Haze; 09-03-2017 at 09:50 PM.
    David C
    2016 F3T
    DIY Garage Door Opener & GPS Mount
    Battery tender cable
    Rear IPS Pack Rack



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •