Quote Originally Posted by Chupaca View Post
First off does it latch easily..? Or do you have to press it down to latch..? The pin on the frunk lid is adjustable, loosen the lock nut and back the pin out a turn or two then test it. When you get to the right point tighten the lock nut to secure the pin in place...
Not to steal this thread, but my frunk opens normally but is difficult to latch. (I have to press it down ... with some force.) I see two nuts on the pin - one near the lid and one near the end of the pin. Which nut are you referring to? And in which direction do I need to move the pin in my case? Shorten the pin or lengthen it?

Thanks!