-
Very Active Member
what is it i say
this is what I am looking for ------- I saw it in original packaging on line ... this one is listed as a " front wheel hub cover " ------ I had miss stated it bolts on the fender area , it looks like it bolts onto the hub bolt section ... will double check into this idea !
-
Very Active Member
-
Active Member
ebay hub covers
I found these on ebay
Can Am Spyder Front Wheel Hub Covers
http://www.ebay.com/itm/Can-Am-Spyde...dZqcax&vxp=mtr
Originally Posted by youngers
this is what I am looking for ------- I saw it in original packaging on line ... this one is listed as a " front wheel hub cover " ------ I had miss stated it bolts on the fender area , it looks like it bolts onto the hub bolt section ... will double check into this idea !
Can Am Spyder Front Wheel Hub Covers
Rick & Kathy
Ellis County TX
-
Active Member
covers
Originally Posted by Kathy76065
That Ebay post says it came off a GS model. I wonder if it will fit an RT???
-
Very Active Member
Originally Posted by Ryan12
That Ebay post says it came off a GS model. I wonder if it will fit an RT???
I looked at the mount situation , I would use only the top 2 hole pattern looks like the lower ones bolt too the actual hub assembly , I do not wish to mess with the alignment area of the tire , but I would think the upper holes would do just fine ... I saw these in the packaging somewhere in the world of internet fun ...
-
Very Active Member
Kathy, I'll let you know... but I believe it does. Ordered. They'll match my swing arm rear covers.
Rear Swing arm covers.jpg
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020 |
|
-
Very Active Member
Originally Posted by youngers
this is what I am looking for ------- I saw it in original packaging on line ... this one is listed as a " front wheel hub cover " ------ I had miss stated it bolts on the fender area , it looks like it bolts onto the hub bolt section ... will double check into this idea !
I tried to install these on 2012 RTS and they wouldn't fit properly. I think that someone said that one side needs to be shimmed with washers which are not included with the kit.
2017 F3 Limited in Intense Red Pearl
2008 Triumph Rocket (SOLD)
2002 Honda VTX 1800 C ( SOLD)
2014 Triumph Thunderbird Commander
-
Very Active Member
Ex-Rocket Thanks for the heads up!
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020 |
|
-
Very Active Member
Mounted on my '13 RTL perfectly, no shims needed
Received and mounted the Can Am Spyder Front Wheel Hub Covers that were listed on EBay.
A big Thank-you to youngers and Kathy76065, They fit just perfect and make my inner hubs look cleaner than my newish wheels....
RTL Front Wheel inner hub caps (Medium).jpgRTL Front Wheel inner hub caps 1 (Medium).jpg
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020 |
|
-
Very Active Member
that is great
glad those do fit I will check on a set myself Lamont ,in another section mentioned that these cover interfere with the shock mounts lower joint , when the wheels are turned this was on the other style cycle , not the r-t ... looks like these fit the r-t just fine
-
Very Active Member
Originally Posted by youngers
I looked at the mount situation , I would use only the top 2 hole pattern looks like the lower ones bolt too the actual hub assembly , I do not wish to mess with the alignment area of the tire , but I would think the upper holes would do just fine ... I saw these in the packaging somewhere in the world of internet fun ...
youngers, they mount using the supplied allen headed bolts to replace the stock fender bolts, direct replacement, easy peasy.
Safe Rides,
David and Sharon Goebel
Both Retired USAF Veterans
2018 Anniversary Edition RT Limited
Baja Ron ultimate swaybar. Vredestein tires, Baja Ron Front Shock Pre-load adjusters, Pedal Box, See my Spyder Garage
IBA 70020 |
|
-
Very Active Member
One of my front hub covers popped off on the ride home from the dealer when I bought it. I called the dealer and they shrugged it off and wouldn't warranty it. Honestly, it didn't matter much to me, so I didn't push it and just took the other one off. I've been running it that way for almost 3 years with no ill effects.
My previous 2008 when bought used didn't have them either, so at the time I never even knew they came with a cover.
2020 RTL SE6
Previously 2008 GS SM5 and 2014 RT SE6
-
Active Member
2010 RT SM5
looked at mine this morning after seeing this post both are gone, how long can you ride with them missing?
-
Very Active Member
Originally Posted by chaz7771931
looked at mine this morning after seeing this post both are gone, how long can you ride with them missing?
As long as the bike lasts. They're just a beauty accessory to hide the axle bolt.
2020 RTL SE6
Previously 2008 GS SM5 and 2014 RT SE6
-
Active Member
Originally Posted by JayBros
The part number is 705401100, wheel cap
Is that the part number for the plastic or metal ones?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|