Results 1 to 16 of 16
  1. #1
    Active Member mcurtright's Avatar
    Join Date
    Sep 2015
    Location
    Yulee fl
    Posts
    33
    Spyder Garage
    0

    Default Rear rotor torque?

    Got my balancer in from lamonster today new tire will be in tomorrow.got the kumho ecsta ast
    Does anyone know what the torque specs are for the rotor,caliper,and axle bolts?
    From what ive been reading on here i should probably go buy a lttery ticket for getting 14,180 miles
    Out of the factory rear tire lol. Anyway if anyone knows the specs it would be appreciated thanks

  2. #2
    Very Active Member SteveLaoyster's Avatar
    Join Date
    Nov 2015
    Location
    Myerstown, Pennsylvania
    Posts
    742
    Spyder Garage
    1

    Default

    What model & year please?
    AKA Jud Smales, Four Year Spyder Ryder!
    "Quando Omni Flunkus, Moritati"

    The Critter 2016 RT-S
    Cat Bypass from Lamonster
    BajaRon Sway Bar
    Hella dual horns with relay
    BRP Hitch with trailer module
    Foam Grips
    Adjustable Air Deflectors
    Driver & Passenger Gel Pads in Seat
    Shorty antenna
    Ultraguard half cover
    Gremlin bell from my son
    Break Stripe Kit from Wrap My Spyder
    2016 RT-S , stock not yet Pearl White

  3. #3
    Very Active Member Fatcycledaddy's Avatar
    Join Date
    Jul 2015
    Location
    Dorr, michigan
    Posts
    1,336
    Spyder Garage
    1

    Default

    For a 2015 RT

    rear brake rotor bolts 68 lbf FT

    rear caliper bolts 77 lbf ft
    rear axle nut 166 lbf ft
    2020 RT Limited , Petrol Blue

  4. #4
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,144
    Spyder Garage
    2

    Default

    Quote Originally Posted by mcurtright View Post
    Got my balancer in from lamonster today new tire will be in tomorrow.got the kumho ecsta ast
    Does anyone know what the torque specs are for the rotor,caliper,and axle bolts?
    From what ive been reading on here i should probably go buy a lttery ticket for getting 14,180 miles
    Out of the factory rear tire lol. Anyway if anyone knows the specs it would be appreciated thanks
    I have a 2016 F3 Limited, and that looks like an RT.......I have only commented as you may get differing specs for the axle, as BRP changed from a lower torque setting of 90? or so to 160 ft/lbs a couple (few?) years ago........AND...... 160 is bloody hard to get to.

    Disc Rotor 68 ft/lbs
    Brake Caliper 77
    Axle 166 (+/- 10lbs)

    Pete
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  5. #5
    Active Member mcurtright's Avatar
    Join Date
    Sep 2015
    Location
    Yulee fl
    Posts
    33
    Spyder Garage
    0

    Default

    Sorry forgot to put that in its a 2015 rtl

  6. #6
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,144
    Spyder Garage
    2

    Default

    Quote Originally Posted by mcurtright View Post
    Sorry forgot to put that in its a 2015 rtl
    Fatcycle has got you covered

    Pete
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  7. #7
    Active Member mcurtright's Avatar
    Join Date
    Sep 2015
    Location
    Yulee fl
    Posts
    33
    Spyder Garage
    0

    Default

    Ok thanks alot found several videos on taking the tire off but no one mentioned torque specs i appreciate it
    I will let you know how it goes i will be mounting tire myself called several tire shops and nobody will touch it
    Get the standard answer of hell no

  8. #8
    Very Active Member Fatcycledaddy's Avatar
    Join Date
    Jul 2015
    Location
    Dorr, michigan
    Posts
    1,336
    Spyder Garage
    1

    Default

    Quote Originally Posted by mcurtright View Post
    Ok thanks alot found several videos on taking the tire off but no one mentioned torque specs i appreciate it
    I will let you know how it goes i will be mounting tire myself called several tire shops and nobody will touch it
    Get the standard answer of hell no
    I got the same response when I called, so I just took it into one of those tires shops with a new tire and the rim and said can you change this for me? They said sure no problem, I never did tell them what it was for.
    2020 RT Limited , Petrol Blue

  9. #9
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,144
    Spyder Garage
    2

    Default

    Quote Originally Posted by Fatcycledaddy View Post
    I got the same response when I called, so I just took it into one of those tires shops with a new tire and the rim and said can you change this for me? They said sure no problem, I never did tell them what it was for.
    Yep, same for me.....all 3 local tyre shops were happy to change it......mind you, I did buy the tyres from the shop I used to change them. There is absolutely no difference to changing a normal car wheel/tyre, except they have trouble balancing it.

    Pete
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  10. #10
    Active Member Ryan12's Avatar
    Join Date
    Apr 2017
    Location
    Wichita, Kansas
    Posts
    117
    Spyder Garage
    0

    Default Tire

    I took my whole rear wheel and hub assy to my local Dealer here in Wichita, KS. and had no problem putting on the Yokohama S Drive. Took 15 min and $27. Im a happy camper. Heck I thought 96 FT lbs was a lot if torque for my 2012 RT.

  11. #11
    Active Member mcurtright's Avatar
    Join Date
    Sep 2015
    Location
    Yulee fl
    Posts
    33
    Spyder Garage
    0

    Default

    Got my tire and balancer on today. Was not too bad even mounting tire myself everything
    Seems good belt is running almost center of the pulley. Has anyone else noticed the
    Parking brake pawl on the caliper rubbing on their muffler? Once again thanks for the
    Info on torque specs

  12. #12
    Member
    Join Date
    Jan 2019
    Location
    AZ
    Posts
    20
    Spyder Garage
    0

    Default

    Have a 2013 RT. Anyone know if the torque settings mentioned above are the same for the 13.

  13. #13
    Member
    Join Date
    Jan 2019
    Location
    AZ
    Posts
    20
    Spyder Garage
    0

    Default

    Discount tire did mine, no problem. Couldn't balance it.

  14. #14
    Very Active Member Revalden's Avatar
    Join Date
    Nov 2018
    Location
    Claremore, Ok.
    Posts
    683
    Spyder Garage
    1

    Default

    Quote Originally Posted by mcurtright View Post
    Ok thanks alot found several videos on taking the tire off but no one mentioned torque specs i appreciate it
    I will let you know how it goes i will be mounting tire myself called several tire shops and nobody will touch it
    Get the standard answer of hell no
    Since you've taken it off yourself, take it in and there's no need to tell them what it's off of. Keep going around the shops until you find one that has the small hub lock.
    2015 RTS SE6 Special Series Red/Black w/Magnesium front fenders(bought in Nov. 2018 w/9,400 miles)
    Dynojet Power Commander V, Power Commander POD-300 Display, PCV Map Switch, Pedal Commander (WOW)
    Passenger Arm Rests, Windshield Air Wing
    Baja Ron's Sway Bar & Spring Adjusters
    Air Scoops, LaMonster's Hiway Pegs
    Magnetic Mirror Mounts, Air Innovations Seat Cushion
    Red Chrome pin striping on Black hood
    Federal Formoza AZ01 front tires (they're GREAT)
    Kumho Ecsta AST KU25 All-Season Tire - 225/50R15 91H
    LED bars above radiator inlets
    LED brake/running/turn signals on license plate frame
    Tag-Along trailer
    LED headlights LED fog lights (WOW)
    2" x 2" Road Lights inside front fenders
    7' x 10' Cargo trailer
    Garmin 396 LM GPS
    RLS Cat-delete resonator with China Akropovic muffler
    New Banshee AGM
    M3 TPMS on front tires
    Remote Control for Heated Jacket and Heated Riding Pants
    Analog Clock and Analog Volt Meter
    Loose Nut Behind Handlebars
    2015 RT-S Special Series , Stock Spark Plugs Brake Pedal Extension Cherry Red/Black

  15. #15
    Very Active Member Snoking1127's Avatar
    Join Date
    Oct 2020
    Location
    Arizona
    Posts
    953
    Spyder Garage
    0

    Default

    Quote Originally Posted by Fatcycledaddy View Post
    For a 2015 RT

    rear brake rotor bolts 68 lbf FT

    rear caliper bolts 77 lbf ft
    rear axle nut 166 lbf ft
    Are these numbers the same from our 2018 RT-L???
    2018 RT Limited - Asphalt Metallic - East Valley of Phoenix/ 2018 RT Limited Chrome
    Champagne Metallic Lake Stevens, Wa

    (Champagne/Hooker)Magic Mirrors, 360 LED head lights, BajaRon sway bar, H&R springs and shock adjusters, dash cam, foam grips, third brake light 4 LED strobe for 7 seconds and then on steady, rear LED turn signals/8 ohm 50W resistors, sequential turn signals on front fenders, Federal Formosa's front and General out back, and driver backrest.

    Things that move between machines: Ikea sheep skins, Zuno XT GPS, and extra tools. Hooker is going to be my summer up North and Hookie my winter trike down South.

    (Asphalt/Hookie) Elka shocks on front - BajaRon sway bar, OEM drivers backrest, LED headlights, dual USB with volt meter, dash cam, foam grips - magic mirrors - front tires Vredestein Quatrac SL on PPA ORB Chrome wheels.


  16. #16
    Very Active Member IGETAROUND's Avatar
    Join Date
    Oct 2011
    Location
    Kalamazoo, Mi
    Posts
    1,819
    Spyder Garage
    1

    Default

    I don't believe that these have been changed since the 2014's


    Quote Originally Posted by Fatcycledaddy View Post
    For a 2015 RT

    rear brake rotor bolts 68 lbf FT
    rear caliper bolts 77 lbf ft
    rear axle nut 166 lbf ft

    Al in Kazoo
    All the great movements in the world began with a cup of coffee!

    2018 F3-T


    My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
    2018 F3-T , Pearl White

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •