-
Removal of Chrome Emblem on Rear Trunk
Does anyone know how to remove the rear emblem from the trunk on a 2015 RT? Someone badly scratched the trunk lid and i need to repaint it. I would like to remove the emblem to get a good sanding/paint/polishing job.
Thanks for your help...
Lone Star Spyder
-
It's put on with two sided tape. I stuffed a screwdriver under mine. the tape gum will come off with gas on a cloth.
-
Active Member
Heat it with a hair dryer first. This will soften/loosen the glue.
2014 Cognac RT Limited #185 (destroyed in T-Bone wreck 3/21/2014)
2014 Cognac RT Limited #5333 (replacement 5/16/2014)
2018 Champagne RT Limited #1002 (traded 1/31/2018)
-
Very Active Member
Let it sit in the hot Texas sun to let the adhesive get as soft as possible. I would then try to work it off with a plastic spatula.
Artillery lends dignity to what would
otherwise be a vulgar brawl.
******************************
Cognac 2014 RT-S
-
Active Member
A trick from the dentist
Dental Floss is a great tool for removing double sided tape. Just get it started under on of the edges and "saw" through the tape. If is amazing, and a really cheap tool.
After the tape is cut, you can remove it in a variety of ways, but this will get the emblem out of the way.
-
Thanks everyone!
Originally Posted by Gary
It's put on with two sided tape. I stuffed a screwdriver under mine. the tape gum will come off with gas on a cloth.
Thanks for all the help. I heated it with a hair drier and slowly pried it off with a spatula.
Thanks all!
-
Very Active Member
Floss it and get the residue off with 41hkP330B1L._SY355_.jpg
2016 F3-T SE6 Roadster , Extended brake pedal for which I drilled out the brake rod yolk to lower it and added spacers to lift it slightly Black/Grey
-
Another effective method is by uing a hair dryer and fishing line
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|