-
Rear Luggage Rack for 2016 RS
Thanks for the responses to my last luggage post. The issue I have is that all of the hard an soft side saddlebags take up the room for a passengers legs and also are likely to hit the tail lights which stick out on my model. I looked for a rack that I could fit behind the seat that would be attached to the rear or the back bumper. Does anyone make a rack for the 2016 model?
-
Very Active Member
Depends....
You can modify the turn signals and some hard bags have them built in. As for a rack, if you have a back rest you can add onto it for soft luggage or Givi for one has a hard case you can put on. Check our sponsor/vendors seems there are some solutions there. I made my own with the oem back rest/rack offered for the early models...mine is a 2012 RS
20160225_101925_resized.jpg 20160225_102032_resized.jpg 20160225_102206_resized.jpg soft bags from Kurakyn one for long trips one for shorter ones...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
No back rest, just the standard seat.
-
You can drill the can am sport rack for mounting an adaptor plate for a hard trunk on it. (ie Givi etc) http://www.ebay.com/itm/Can-Am-New-O...-/181018370295
IIRC there are a few forum members here who have done that.
When life throws you curves, aim for the apex
Current stable: 09 Thruxton / 09 FZ6
Sold List: 97 Ninja500R, 03 SV650K3, 01 Ducati 750Sport Dark, 73 CB350/4, 03 F650GSA, 08 Gixxer600, 03 Gixxer600, 91 VFR750F, 09 KLX250, 06 Thruxton 900, 08 Spyder RS , 12 Street TripleR, 15 RC390, 02 VFR800, 09 KLX250S, 10 F650GS
JLohPhotos
... Motorcycles are kind of like Baskin Robbins... You're looking at 31 flavors of ice cream, don't you kind of want to know what they all taste like?...
-
Very Active Member
2013 STL SE5 BLACK CURRANT
SpyderPop's: LED bumpskid
SmoothSpyder: dualmode back rest
T r * * LED:foam grip covers, Tricrings, FenderZ,
brake light strips, wide vue mirrors
Rivico SOMA modulation brake leds
sawblade mowhalk fender accents
minispyder dash toy
Lid lox
KradelLock
Pakitrack
GENSSI ELITE LED H4 headlights
FLO (Frunk Lid Organizer)
BRP fog lights, trailer hitch
SENA 20S EVO
-
Active Member
Originally Posted by asp125
I just got the same one from the same seller on Amazon.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I had it in my wish list for some time, it went down to $98.20, but went back up right after I got it. The only good deal is on the Silver, I will be making it black with Plasti-Dip for now.
2019 RTL
Farkles
BRP Comfort Seat.
Foam Grips
Lidlox
BRP Passenger armrests
Baja Ron Anti sway bar
Lamonster's upgraded BRP vibration damper.
-
I figured out another solution. I'm going to mount 2 angle irons to the bolts that hold on the plate above the rear wheel so they stick out about 12" to the rear and then mount a plate to them with a spacer at the rear to level the plate. Total cost for 2 angle irons and a metal plate less than $10!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|