Results 1 to 1 of 1
  1. #1
    Very Active Member pitzerwm's Avatar
    Join Date
    Nov 2014
    Location
    TriCities, WA
    Posts
    1,431
    Spyder Garage
    0

    Default Adding a Midland 75-822

    Riding with GoldWingers that use a CB to communicate on rides, I decided to get one too. Since the Midland 75-822 with a SR10 was recommended so that is what I got. Thanks to Finless and Lyonsden I'm a go.

    Mounting the unit/s seemed to be the trick, and the pictures that I saw still left some questions, so here are more pictures of how I did it. I used a piece of plastic 2.4mm/,09" thick, heated it with a heat gun and put a small curve on each side so the unit can't slide side to side. I also cut 2 slots at the top to allow the belt clip screws to get past. I put it on the right side because my cup holder is in the way on the left. I haven't had time to give it a try on a ride yet.


    20170515_122111.jpg20170515_122121.jpg

    20170515_122006_resized.jpg20170515_122014_resized.jpg
    Attached Images Attached Images


    One of the hardest decisions you'll ever face in life is choosing whether to walk away or try harder.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •