Results 1 to 7 of 7
  1. #1
    Very Active Member Purple Guy's Avatar
    Join Date
    May 2013
    Location
    Edmonton Alberta, Canada
    Posts
    1,874
    Spyder Garage
    1

    Default Smooth Spyder Belt Tensioner F3-Ltd.

    I installed a Smooth Spyder Belt Tensioner on a buddies 2016 F3-Ltd.
    Set the tension at 10 as per instructions to start off with.
    Though there was an improvement decreasing the belt vibration it was still there.
    Tried increasing the tension to 13 with no noticeable improvement and maybe a little increase in vibration on deceleration.
    Just wondering if anyone has installed a Smooth Spyder Belt Tensioner on their F3-Ltd.
    How’s it working for you & what tension did you set it up with?

    F3 LTD. Tensioner.jpg
    2014 RT-Ltd , Cognac

  2. #2
    Very Active Member Pirate looks at --'s Avatar
    Join Date
    Aug 2013
    Location
    Northern California
    Posts
    3,329
    Spyder Garage
    0

    Default Can't Help

    I have no such vibration at all on my F3L
    White 2013 Spyder RT Limited. BajaRon Swaybar, Custom Dynamic Third Brake Light. Ultimate Custom Black and White seat with driver and passenger back rest. Gloryder Led Wheel lights.Custom Dynamics Led Bright sides, Amber and Red Fender lights, and Saddle Bag Bright sides.

    2016 F3 Limited Intense Red Pearl. Lidlox, BRP Driver Back Rest, BRP Passenger Back Rest,Fog Lights, GPS, Signature Light! Custom Dynamics LED Bright Sides, Amber and Red Fender lights, and Saddle Bag Bright Sides.

  3. #3
    Very Active Member Purple Guy's Avatar
    Join Date
    May 2013
    Location
    Edmonton Alberta, Canada
    Posts
    1,874
    Spyder Garage
    1

    Default

    Quote Originally Posted by Pirate looks at -- View Post
    I have no such vibration at all on my F3L
    I was amazed how much vibration there is on his F3, people pay good money for a therapeutic foot massage like that!
    2014 RT-Ltd , Cognac

  4. #4
    Active Member papanorm's Avatar
    Join Date
    Aug 2016
    Location
    central texas
    Posts
    343
    Spyder Garage
    1

    Default

    I installed the Smooth Spyder on my F3 L with good results. I too set it to 10lbs and still had vibration; went up to 13 then settled in at 11 lbs for best results. Still had some vibes at 67 mph. The best fix I can report is right now at 10 lbs. and three new non Kenda Tyres. No vibes. My observation, as least for my bike is that the tyres contributed to a lot of the vibration.
    2016 F3L , Big Bike Parts Black

  5. #5
    Very Active Member Devious56's Avatar
    Join Date
    Oct 2015
    Location
    N.E. Florida
    Posts
    611
    Spyder Garage
    0

    Default

    I have an RT Limited, and had a SmoothSpyder tensioner on for almost a year, it worked well, but did not get rid of all the vibrations. I find that Doc Humphreys tensioner works much better and got rid of vibrations I didn't realize were there.
    Last edited by Devious56; 05-13-2017 at 08:26 AM.

    How old would you be if you didn't know how old you were?

  6. #6
    Very Active Member Purple Guy's Avatar
    Join Date
    May 2013
    Location
    Edmonton Alberta, Canada
    Posts
    1,874
    Spyder Garage
    1

    Default

    Quote Originally Posted by Devious56 View Post
    I have an RT Limited, and had a SmoothSpyder tendioner on for almost a year, it worked well, but did not get rid of all the vibrations. I find that Doc Humphreys tensioner works much better and got rid of vibrations I didn't realize were there.
    I have Doc's tensioner on my RT as well.
    My buddy bought the Smooth Spyder before BRP's or Doc's was available.
    2014 RT-Ltd , Cognac

  7. #7
    Member Jmez's Avatar
    Join Date
    Jun 2014
    Location
    Greensboro / Jamestown NC
    Posts
    17
    Spyder Garage
    0

    Post Smooth Spyder Belt tensioner

    I installed the Smooth Spyder Belt tensioner on my F3s
    Last year. Have since put 30,000 miles on it. It worked great
    And has continued to prevent any belt vibration. I am happy with the purchase
    Even though I've seen others on the market now for less money. I would definitely
    Purchase this product again if I were to purchase another Spyder. I've had two friends purchase the one from BRap for $49 and it failed and tore their belt up.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •