-
Very Active Member
Pivot Nut Tool
Going to replace my rear tire soon and was wondering if anyone knows what size of a Pivot Nut Tool / Freewheel Tool I should buy to remove the nut when replacing the bearings.
-
I could not find one to fit
So I made one
Checkout the thread " Where can one find a spanner wrench "
Do a search
My post with picture is #8 in that thread
Don
-
Very Active Member
I forget the size, but when someone here gives you the size, try buying it at a bicycle shop. I actually ordered
mine on ebay, before I found out the bicycle shops use the same size. I think I paid around $ 20. Good luck.
....and we're gonna ride, we're gonna ride.....
ride like the one-eyed Jack of Diamonds, with
the devil close behind,.....we're gonna ride....
2008 GS.....PE # 2888
-
We happened to have a wrecking bar that was the perfect size.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
Originally Posted by Big Arm
I forget the size, but when someone here gives you the size, try buying it at a bicycle shop. I actually ordered
mine on ebay, before I found out the bicycle shops use the same size. I think I paid around $ 20. Good luck.
Ya I found one in town for $22, it's 33mm, just don't know if that will fit or not...
-
Very Active Member
Originally Posted by garb55
I could not find one to fit
So I made one
Checkout the thread " Where can one find a spanner wrench "
Do a search
My post with picture is #8 in that thread
Don
Tried to search with no luck. If you made it out of a piece of flat metal, what is the width of the piece?
-
Look for the FR-6 tool for BMX bikes. About $15 or so.
-
Very Active Member
Originally Posted by DrewNJ
Look for the FR-6 tool for BMX bikes. About $15 or so.
I have found a few of them but they seem to come in different sizes.
-
RT-S PE#0060
I use the fr6 tool from a bmx and it works very well
-
RT-S PE#0060
Its a park tool fr 6 made for bmx I got mine off e bay but any bike shop should be able to get you one
-
Very Active Member
Originally Posted by Purple Guy
Going to replace my rear tire soon and was wondering if anyone knows what size of a Pivot Nut Tool / Freewheel Tool I should buy to remove the nut when replacing the bearings.
Here's the one I have used several times. Great fit.
Pit Posse PP2850 SwingaRM Pivot Nut Tool GSXR750 GSXR1000 Sv650 Dl650
http://www.ebay.com/itm/Swingarm-Piv...0/400952276352
David
-
Very Active Member
Thanks everyone for your responses!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|