-
Active Member
-
[QUOTE=Dray;1244677]Can anyone tell me how to locate/find the brake/running light wires so I can
connect a Gear Brake module into everything. I have been through the
service/repair manual at least a half dozen times and yet to find anything that
says here they are. Any and all help would be greatly appreciated.
It seems that this is an unanswered question that is asked by many of us. Where do we connect a third brake light wire on the F3-T and Limited?
Chris
-
Very Active Member
The brake light wires are under the cover behind the passenger seat.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Very Active Member
IMG_2756.jpg To the right of the picture is the rear of the bike. Those are the wires.
Last edited by Highwayman2013; 05-09-2017 at 08:48 AM.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Originally Posted by Highwayman2013
IMG_2756.jpg To the right of the picture is the rear of the bike. Those are the wires.
Yes I know WHERE the wires are, but which one for just the Brake Light. I want to connect my front fender mud flap lights to the brake light on my F3-T. The F3-T uses turn/brake for the same wire. Sooo how do I hook up just for the brake lights only?
-
Very Active Member
Originally Posted by No 2817
Yes I know WHERE the wires are, but which one for just the Brake Light. I want to connect my front fender mud flap lights to the brake light on my F3-T. The F3-T uses turn/brake for the same wire. Sooo how do I hook up just for the brake lights only?
In those plugs, the wires are thus:
=============
Right Signal = BLACK/YELLOW
Left Signal = GREY/PINK
Running Lights = WHITE
Brake Light = ORANGE
BLACK ground
backup = PINK/BEIGE
=============
2016 F3-T SE6 Roadster , Extended brake pedal for which I drilled out the brake rod yolk to lower it and added spacers to lift it slightly Black/Grey
-
Originally Posted by Rattlebars
In those plugs, the wires are thus:
=============
Right Signal = BLACK/YELLOW
Left Signal = GREY/PINK
Running Lights = WHITE
Brake Light = ORANGE
BLACK ground
backup = PINK/BEIGE
=============
Thank you, as I was looking for this info too.
Is it Friday yet? ... Oh yeah, I forgot. I'm retired
Past bikes
2010 RS - Sold
2012 RT - Sold
2014 RT - Testing completed
2016 F3-T Audio package - Sold
-
Active Member
-
Originally Posted by Rattlebars
In those plugs, the wires are thus:
=============
Right Signal = BLACK/YELLOW
Left Signal = GREY/PINK
Running Lights = WHITE
Brake Light = ORANGE
BLACK ground
backup = PINK/BEIGE
=============
I have been looking for this for a year. Never seemed to get an answer.
Chris
-
Active Member
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|