-
Active Member
Clutch reservoir cover
Anyone know how to replace the Clutch reservoir cover? I ordered the new cover but cant get the gasket or sight window off the old to use with the new.
-
Very Active Member
Interesting. ...
The new one did not come with the gasket and sight window..? I have not done one on the spyder but on others it is a pressure fit sight glass going through the rubbed to make the seal. Tricky and you don't want to tear it....
Did check cheapcycleparts.com and did not find the seal or sight glass as something you can order...
Last edited by Chupaca; 04-20-2017 at 11:05 PM.
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Does the RS even have a sight glass? There isn't one on the RT and I don't remember having one on the GS I used.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Very Active Member
They do....
Not sure if it even works...it is a plastic barrel that goes down into the resivouir at an angle. Always looks the same even when my o-rings went bad and the fluid level dropped it still looked the same. You could cork it for all the good it does... a sensor like the brakes would be the way to go...
Originally Posted by SpyderAnn01
Does the RS even have a sight glass? There isn't one on the RT and I don't remember having one on the GS I used.
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
I see, I was thinking it was a sight glass where you see the level without removing the cap, you know like they have on almost every other motorcycle made.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
MOgang Member
To take off the gasket and sight window from the clutch reservoir, unscrew the two screws on the cover with a T20 torx. Make sure there's a shop rag on the panel underneath where you're working to keep any fluid off the Spyder.
Phantoms rule!
Joy
Very Happy Ryder... '09 Phantom and a '15 F3-S
If you don't slow down, they can't catch you..
If you don't give up, they can't win.
What a long strange journey its been.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|