Good helmet lock

[ARNIE R]

I have seen a few posts regarding different helmet lock types. Is there anything out there that most people prefer or like better? My full face modular just not quite fit into the frunk nor the R-35 saddlebags.

[Bob Denman]

Lidlox...

[Chupaca]

There are quite a few. If it is opinions you need I like the kryptonite retractable cable combination lock. Can lock both helmets on the ryde...

[SPYD3R]

LIDLOX

[Pirate looks at --]

Have to agree with Bob that Lidlox are really convenient and allow you to keep the storage compartments free for other stuff! Easy installation about 10 minutes or less.

[ARNIE R]

Just saw those Lidlox and they looked they would be perfect. I guess the 1011B's for a single or the 1012B's for the dual set would be the correct ones.

Thanks all for the suggestion!

[Explorer]

Get the set to keep it balanced.

[Bob Denman]

They look much better as a paired set!

[Kwalsh]

Lidlox!! I had a problem with one and he replaced it for free

[Smutt]

Another vote for Lidlox, they work great.

[sealfloorboards]

Take a look at Seal Floorboards "keyless" full face lock. It can also be used as a Ram Ball Phone holder (double duty) or any number of Ram products. No moving parts. Bolts to the handle bars. As with all Seal Products, it's easy to install and ultra simple in design and concept. I'll be selling them at Spyderfest. Check my website.
Ride in comfort,
John

[Bfromla]

1more for Lidlox they fit the spyder great & if any problems the customer service is awesom & fast. Before i got my set thow i did carry arounda cable lock & would run thru full face & handlebar or a grabrail. It woked but was more to carry aound Lidlox stays mounted & out of the way i have seen F3 mount them on ame bolt as the grab rails Very handy to only need a key & the T bar.

[Mazo EMS2]

Another vote for Lidlox. We really like em.

[vondalyn]

Another vote for Lidlox. We really like em.

ditto for us -- we've both had them on all of our rides, even the 2 wheeled ones.

I went for a group ride this past weekend with a bunch of different motorcycles (had only ridden with a small number of the people who came for the ride) and before the ride, only a couple of the people talked to me. I thought it was going to be "one of those rides" but it actually turned out great, and at the end of the ride, everyone was clustered around the F3 asking questions and most of them played with the lidlox "what are these?" I think I converted some of them

[PaladinLV]

LidLox!

AJ

I have seen a few posts regarding different helmet lock types. Is there anything out there that most people prefer or like better? My full face modular just not quite fit into the frunk nor the R-35 saddlebags.

[I-Day]

I have the lid locks but find when I hang the helmet the helmet hits the side of the spider. I have the 2017 F3 L. Am I hanging it wrong?

[papanorm]

I-Day , did you try reversing the helmet so the helmet opening hangs towards the bike?

[DrewNJ]

I use an inexpensive short bike lock and lock it to the bike through the chin bar. Usually, leave the helmet sitting on the seat and the lock through the grab handles. I don't want to come out to a missing helmet with a short section of strap remaining hooked to my bars.

[Tango]

LIDLOCKS are great! Tom

[ARNIE R]

Received my twin Lidlox set today. Easy installation and work just as designed. Thanks to all thank recommended this product.

[furface90]

I use this and it works just great.

http://www.twistedthrottle.com/helmet-guardian-black