-
loos connettion
I replaced the battery in my 2010 rt the cables are tight on the battery but when I try to start it sounds like a loose connection click but not trying to start I am lost now any one help
-
-
Originally Posted by Bob Denman
I hate to ask this...
Are you SURE that the new battery was charged, and ready to be installed?
(They should be put on a trickle-charger overnight, before being pressed into service...)
Put a charger on for a few hours and then try again.
Terry
-
Where to start....
Step one..... hook up a jumper to the system and if all is well look at the battery and or connections. Less likely but worth a check are all the fuses and relays, kill switch and any area recently worked on. From what you indicate I would suspect faulty connections or a battery with only a surface charge....
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
started
I bought a battery from batteries plus this morning I ck the voltage it was only 10 V hooked it up to a jumper and it started right away thanks for the tip back to basics was just right
-
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|