-
Very Active Member
Question about trailer hitch
I understand that the show chrome hitch will work for the RT, ST, RS, and GS. I know that the F3 looks totally different, but the swing arm on the F3T looks more similar to the previously mentioned bikes. So, will a hitch from a RT fit a F3T?
2021 RTL , brake pedal from "Web Boards" chalk white
-
Very Active Member
Yes it will fit. The swing arm is the same.
2018 F3 LIMITED
-
Very Active Member
The BRP hitch that I took off my 2013 RT LTD fits onto my F3T. As stated above the swing arm is the same. I just need to get that wiring harness set up for my RT622 trailer.
-
Very Active Member
Originally Posted by vtrider
The BRP hitch that I took off my 2013 RT LTD fits onto my F3T. As stated above the swing arm is the same. I just need to get that wiring harness set up for my RT622 trailer.
The wiring harness harness from the RT will fit the F3 too. Did you take it off?
2018 F3 LIMITED
-
Very Active Member
Originally Posted by billybovine
The wiring harness harness from the RT will fit the F3 too. Did you take it off?
I could be wrong on this but i believe that the wiring harness for the RT and the F3 are different, the Hitch is the same.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
Thanks guys. I don't have a wiring harness on the RT, as I just use the hitch to attach my Doc Humphries rack. Thanks again.
2021 RTL , brake pedal from "Web Boards" chalk white
-
Very Active Member
2018 F3 LIMITED
-
Very Active Member
I was relying on info from Lamonster Garage which says that they are different wiring harnesses and are not interchangeable.
Cruzr Joe
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Very Active Member
Originally Posted by Cruzr Joe
I was relying on info from Lamonster Garage which says that they are different wiring harnesses and are not interchangeable.
Cruzr Joe
BRP harness will work. Show Chrome harness for RT will not. Other after market may not as well.
2018 F3 LIMITED
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|